Screed Fast-Hardening Cement 2814
Fast screed binder · INTL · manufacturer-sourced
How long before you can tile over Remmers Screed Fast-Hardening Cement 2814?
Short answer
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Remmers Screed Fast-Hardening Cement 2814
- Variant
- Fast screed binder
- Region
- INTL
- Listed use
- fast screed, underfloor heating
- Timed stages recorded
- tooling, tile ready, floor ready, light foot, heavy traffic
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet 2814 TM-4, 03/25
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A fast screed with unusually early tiling, 6 hours, but a parquet wait of 48 hours tied to a moisture limit of 1.8%. Heating can start after 3 days.
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Fast screed binder to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 68°F
- Working time ends45 minutes
- Light foot traffic3 hours
- Ready for tile6 hours
- Ready for flooring2 days
- Heavy traffic3 days
Worth noticing: Working time is only 45 minutes; the next stated stage, light foot traffic, is 3 hours.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Working time ends45 minutes
- Ready for tile6 hours
- Ready for floor covering2 days
- Light foot traffic3 hours
- Heavy traffic3 days
From Remmers data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: remmers.com
Conditions & fine print
- Stated conditions: 68°F (20°C)
- Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
- Region INTL. Formulas can differ between countries; check your container.
- Working time ends: The source gives no conditions for this time.
- Ready for tile: The source gives no conditions for this time.
- Ready for floor covering: Moisture must be 1.8% or less.
- Light foot traffic: The source gives no conditions for this time.
- Heavy traffic: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Using this specific product
Remmers Screed Fast-Hardening Cement 2814 is listed here as the Fast screed binder version for fast screed and underfloor heating. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Fast screed binder; related versions can use different timing.
- For fast screed and underfloor heating, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- The source gives no conditions for this time. Moisture must be 1.8% or less.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The sheet gives a working time of 45 minutes at 20°C. The sheet gives tiles bonded after 6 hours. The sheet gives parquet or carpet after 48 hours.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with Bona Waterborne Hardwood Floor FinishLight foot traffic: 3–4 h there, 3 h here.
- Compare with Ceresit CN 85 TurboLight foot traffic: 3 h there, 3 h here.
Questions
How long before you can tile over this product?
Remmers states: The sheet gives a working time of 45 minutes at 20°C. Conditions: The source gives no conditions for this time.. The sheet gives tiles bonded after 6 hours. Conditions: The source gives no conditions for this time.. The sheet gives parquet or carpet after 48 hours. Conditions: Moisture must be 1.8% or less.. The sheet gives foot traffic after 3 hours at 20°C and 65% humidity. Conditions: The source gives no conditions for this time.. The sheet gives floor heating start-up after 3 days. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
When can tiles go on Remmers 2814 screed?
The sheet gives 6 hours, with parquet or carpet after 48 hours at 1.8% moisture or less.
How long before I can install flooring over this product?
Remmers states: The sheet gives parquet or carpet after 48 hours. Conditions: Moisture must be 1.8% or less.. These are the manufacturer’s stated times, not a guarantee.
How long do I have to work with this product?
Remmers states: The sheet gives a working time of 45 minutes at 20°C. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long before I can walk on tile set with this product?
Remmers states: The sheet gives foot traffic after 3 hours at 20°C and 65% humidity. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.