ACTION HUB
How long before you can drive on a coating or repair?
Use the milestone for vehicle traffic, not a generic dry-to-touch time. The table below is built only from numeric times in manufacturer documents already recorded in our catalog.
Important: Shortest does not mean interchangeable. Product type, surface, conditions and intended use still have to match your project.
Manufacturer-stated times
| Product | Manufacturer-stated minimum | Condition/source |
|---|---|---|
| LATICRETE 4-XLT Rapid Rapid-setting tile mortar | 5 hours | The data sheet gives no conditions for this time. |
| LATICRETE PERMACOLOR Grout All colors | 6 hours | See product page |
| Sika SikaQuick Pro 1000 Fast-setting repair mortar | 6 hours | The data sheet gives no conditions for this time. |
| Custom Building Products SpeedSlope Rapid Setting Sloping Mortar Powder (all sizes) | 12 hours | Drying and curing times depend on ambient and surface temperature and humidity. |
| Custom Building Products VersaBond-LHT RS Rapid Setting Large & Heavy Tile Mortar Gray / white | 1 days | Temperate conditions; assembly must be rated for heavy traffic |
| Eagle Paver Sealer Wet-look acrylic | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Eagle Supreme Seal Solvent-based acrylic | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Foundation Armor SX5000 Penetrating Sealer Silane-siloxane | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| LATICRETE 253 Gold Thin-set mortar | 1 days | See product page |
| LATICRETE 254 PLATINUM Plus Polymer-fortified thin-set mortar | 1 days | Listed under Working Properties with no conditions. |
| LATICRETE LATAPOXY 300 Adhesive Epoxy tile adhesive | 1 days | Listed under Working Properties with no conditions. |
| LATICRETE SPECTRALOCK 1 Pre-Mixed Grout Translucent (DS-65327-0926) | 1 days | 70°F (21°C) |
| Latex-ite Airport Grade Driveway Filler Sealer Asphalt emulsion | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Latex-ite Ultra Shield Driveway Filler Sealer Asphalt sealer | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| QUIKRETE Concrete & Masonry Waterproofing Sealer Clear water-based | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| QUIKRETE Concrete Resurfacer (No. 1131) 40 lb | 1 days | Vehicle traffic |
| Rust-Oleum RockSolid Metallic Garage Floor Coating Kit Two-part kit | 1 days | 70–80°F (21–27°C) and 50% relative humidity |
| Schluter Systems ALL-SET Modified Thin-Set Mortar Gray / white | 1 days | At 70°F (21°C). Protect the installation for a minimum of 24 hours to allow the mortar to set. |
| SealBest 1000 Driveway Sealer & Filler Premium asphalt emulsion | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| SealBest 800 Driveway Sealer & Filler Asphalt emulsion | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| DAP Concrete Crack Filler Gray | 2 days | Vehicle traffic |
| Foundation Armor AR350 Wet Look Sealer Solvent-based acrylic | 2 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| LATICRETE SPECTRALOCK PRO Premium Grout Epoxy (all colors) | 2 days | Temperature table |
| Sakrete (Sika) Sakrete Top’n Bond Concrete Patch & Resurfacer Canada data sheet | 2 days | See product page |
| BEHR PREMIUM Low-Lustre Sealer Clear | 3 days | Heavy foot traffic, not vehicles |
| BEHR PREMIUM Solid Color Concrete Stain (No. 800) Solid color | 3 days | Park tires on corrugated cardboard for 14 days after staining. |
| BEHR PREMIUM Wet-Look Sealer (No. 985) Clear | 3 days | Heavy foot traffic, not vehicles |
| BEHR Premium Wet-Look Sealer High-gloss acrylic | 3 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Custom Building Products Fusion Pro Single Component Grout All colors (sanded) | 3 days | See product page |
| Custom Building Products ProLite RS Premium Rapid Setting Large Format Tile Mortar Gray / white | 3 days | Only if the assembly is rated Heavy or Extra Heavy per TCNA Service Requirements. |
How to use this table
Open the exact product page to see the variant, source wording, stated conditions and other milestones. A minimum time is the earliest stated threshold under the manufacturer’s conditions—not a guarantee for colder, wetter, thicker or poorly ventilated applications.
Related checks
- Confirm the exact formula and region on your container.
- Use the clock for your next action rather than touch-dry time.
- Check temperature, humidity, thickness and substrate notes.
- When the manufacturer provides no correction factor, wait longer and verify physical readiness.