LATICRETE

SPECTRALOCK 1 Pre-Mixed Grout

Translucent (DS-65327-0926) · US · not yet reviewed

Check your container: This countdown is for the Translucent (DS-65327-0926) variant. Similar-looking versions may have different times.

How long before you can shower after using LATICRETE SPECTRALOCK 1 Pre-Mixed Grout?

Short answer

Water-ready: 1 day after application.
Heavy traffic: 1 day after application.
Grout & tile mortar

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Calculate return-to-use time

When was the material placed?
Conditions that affect drying
Where?
Thickness

Stated times

  • Tack-free1–2 hours
  • Light foot traffic6 hours
  • Heavy traffic1 day
  • Water-ready1 day
  • Immersion-ready14 days
  • Full cure28 days

From LATICRETE data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: laticrete.com

Conditions & fine print
  • Stated conditions: 70°F (21°C), with 50°F and 90°F values on the data sheet
  • Dirt and stain resistance takes 14 days at 70°F (21 days at 50°F, 10 days at 90°F). Wait 28 days for harsh cleaning and 14 days before acid cleaners. Protect from exterior rain or heavy moisture for 14 days. Substrate and air must be 50°F to 90°F.
  • Temperature range: 50°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Tack-free: 70°F (21°C)
  • Light foot traffic: 70°F (21°C)
  • Heavy traffic: 70°F (21°C)
  • Water-ready: 70°F (21°C) and 50% RH
  • Immersion-ready: 70°F (21°C)
  • Full cure: 70°F (21°C)
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

LATICRETE SPECTRALOCK 1 Pre-Mixed Grout is listed here as the Translucent (DS-65327-0926) version for tile, floor, and shower. For grouting tile, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Translucent (DS-65327-0926); related versions can use different timing.
  • For tile, floor, and shower, pay particular attention to joint depth, water ratio, cleanup and room conditions.
  • 70°F (21°C). 70°F (21°C) and 50% RH.

How to check readiness

Inspect shaded joints and verify the stated water or traffic milestone. Tack free in 1 to 2 hours at 70°F (4 hours at 50°F; 45 minutes at 90°F). Try a protected edge first and avoid turning, dragging or concentrated loads. Open the area gradually and keep heavy or hot tires off until the full stated milestone.

Avoid this mistake

Color change alone does not prove the joint is ready for immersion.

Questions

How long until I can shower after using this product?

LATICRETE states: For intermittent water exposure, allow a minimum of 24 hours. Conditions: 70°F (21°C) and 50% RH. For submerged or steam room use, cure a minimum of 14 days before filling with water. Conditions: 70°F (21°C). These are the manufacturer’s stated times, not a guarantee.

How long does this product take to dry?

LATICRETE states: For intermittent water exposure, allow a minimum of 24 hours. Conditions: 70°F (21°C) and 50% RH. Ready for heavy foot traffic in 24 hours at 70°F (48 hours at 50°F; 10 hours at 90°F). Conditions: 70°F (21°C). Full cure: 28 days at 70°F (28 days at 50°F; 14 days at 90°F). Conditions: 70°F (21°C). These are the manufacturer’s stated times, not a guarantee.

How long until I can walk or drive on this product?

LATICRETE states: Ready for light foot traffic in 6 hours at 70°F (9 hours at 50°F; 4 hours at 90°F). Conditions: 70°F (21°C). Ready for heavy foot traffic in 24 hours at 70°F (48 hours at 50°F; 10 hours at 90°F). Conditions: 70°F (21°C). These are the manufacturer’s stated times, not a guarantee.

How long does this product take to fully cure?

LATICRETE states: Full cure: 28 days at 70°F (28 days at 50°F; 14 days at 90°F). Conditions: 70°F (21°C). These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch or handle?

LATICRETE states: Tack free in 1 to 2 hours at 70°F (4 hours at 50°F; 45 minutes at 90°F). Conditions: 70°F (21°C). These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dirt and stain resistance takes 14 days at 70°F (21 days at 50°F, 10 days at 90°F). Wait 28 days for harsh cleaning and 14 days before acid cleaners. Protect from exterior rain or heavy moisture for 14 days. Substrate and air must be 50°F to 90°F. Application temperature: 50°F to 90°F. Follow the product label for your conditions.

Similar products

All grout and tile mortar