CN 85 Turbo
Rapid self-levelling floor (Henkel) · INTL · manufacturer-sourced
How long before you can install flooring over Ceresit CN 85 Turbo?
Short answer
All stated times for CN 85 Turbo
| Milestone | Time | Condition |
|---|---|---|
| Ready for floor covering | 1 day | The source gives no conditions for this time. |
| Light foot traffic | 3 hours | The source gives no conditions for this time. |
Source: Product page, accessed 2026-10-26.
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Rapid self-levelling floor (Henkel) to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 73°F
- Light foot traffic3 hours
- Ready for flooring1 day
Worth noticing: Light foot traffic at 3 hours; ready for flooring at 1 day.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Ready for floor covering1 day
- Light foot traffic3 hours
From Ceresit product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: ceresit.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
- Region INTL. Formulas can differ between countries; check your container.
- Ready for floor covering: The source gives no conditions for this time.
- Light foot traffic: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Ceresit CN 85 Turbo
- Variant
- Rapid self-levelling floor (Henkel)
- Region
- INTL
- Listed use
- floor leveling, fast covering
- Timed stages recorded
- floor ready, light foot
- Source checked
- 2026-10-25
Documentation: Official product page · Product page, accessed 2026-10-26
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A turbo-speed leveller: walkable in 3 hours and ready to cover after 24.
Using this specific product
Ceresit CN 85 Turbo is listed here as the Rapid self-levelling floor (Henkel) version for floor leveling and fast covering. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Rapid self-levelling floor (Henkel); related versions can use different timing.
- For floor leveling and fast covering, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- The source gives no conditions for this time.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The page gives ready to cover after 24 hours. Try a protected edge first and avoid turning, dragging or concentrated loads.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with Bona Waterborne Hardwood Floor FinishLight foot traffic: 3–4 h there, 3 h here.
- Compare with Remmers Screed Fast-Hardening Cement 2814Light foot traffic: 3 h there, 3 h here.
Questions
How long before you can install flooring over this product?
Ceresit states: The page gives ready to cover after 24 hours. Conditions: The source gives no conditions for this time.. The page gives walkable after 3 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
When is Ceresit CN 85 ready for floor covering?
The page gives 24 hours, with walkable at 3 hours.
How long before I can walk on tile set with this product?
Ceresit states: The page gives walkable after 3 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.