High Solids 2-Part Polyaspartic Floor Coating AP-91020-AB
Two-gallon clear kit · US · manufacturer-sourced
How long before you can recoat Ringsend High Solids 2-Part Polyaspartic Floor Coating AP-91020-AB?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Two-gallon clear kit to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 77°F and 50% humidity
- Working time ends40–50 minutes
- Light foot traffic4–6 hours
- Ready for another coat6–10 hours
- Recoat window closes1 day
- Heavy traffic1 day
- Return to service5–7 days
- Full cure7 days
Worth noticing: Recoat inside the window: not before 6–10 hours and not after 1 day.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Working time ends40–50 minutes
- Recoat window closes1 day
- Ready for another coat6–10 hours
- Light foot traffic4–6 hours
- Heavy traffic1 day
- Return to service5–7 days
- Full cure7 days
From Ringsend data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: None
Conditions & fine print
- Stated conditions: 77°F (25°C) and 50% relative humidity
- Floor coating times assume the stated temperature and humidity. Cold slabs, thick coats and damp concrete lengthen them. Follow the current data sheet.
- Temperature range: 59°F to 86°F
- Region US. Formulas can differ between countries; check your container.
- Working time ends: At 73°F and 50% relative humidity.
- Recoat window closes: At 77°F and 50% relative humidity.
- Ready for another coat: At 77°F and 50% relative humidity.
- Light foot traffic: At 77°F and 50% relative humidity.
- Heavy traffic: At 77°F and 50% relative humidity.
- Return to service: At 77°F and 50% relative humidity.
- Full cure: At 77°F and 50% relative humidity.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Ringsend High Solids 2-Part Polyaspartic Floor Coating AP-91020-AB
- Variant
- Two-gallon clear kit
- Region
- US
- Listed use
- floor coating
- Timed stages recorded
- tooling, recoat max, recoat min, light foot, heavy traffic
- Source checked
- 2026-10-25
Documentation: Technical data sheet copy · Revision 2402
Condition attached to the stated time: At 73°F and 50% relative humidity.
About this product
A clear polyaspartic floor kit with a full traffic ladder: light foot at 4 to 6 hours, heavy foot at 24 hours, steel-wheel carts at 5 days, vehicles at 5 to 7 days and forklifts at 7. The sheet is hosted on a distributor's site, so check the manufacturer's current copy.
Using this specific product
Ringsend High Solids 2-Part Polyaspartic Floor Coating AP-91020-AB is listed here as the Two-gallon clear kit version for floor coating. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Two-gallon clear kit; related versions can use different timing.
- For floor coating, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- At 73°F and 50% relative humidity. At 77°F and 50% relative humidity.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The data sheet gives a pot life of 40 to 50 minutes. The data sheet gives a 24 hour recoat window; after that the surface must be abraded to a mild profile. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with LATICRETE SPARTACOTE Epoxy MembraneRecoat: 7 h there, 6–10 h here.
- Compare with Jotun Jotafloor TopcoatRecoat: 7.5 h there, 6–10 h here.
Questions
How long before you can recoat this product?
Ringsend states: The data sheet gives a pot life of 40 to 50 minutes. Conditions: At 73°F and 50% relative humidity.. The data sheet gives a 24 hour recoat window; after that the surface must be abraded to a mild profile. Conditions: At 77°F and 50% relative humidity.. The data sheet gives a recoat time of 6 to 10 hours, once the floor can be walked on with normal shoes. Conditions: At 77°F and 50% relative humidity.. The data sheet gives light foot traffic after 4 to 6 hours. Conditions: At 77°F and 50% relative humidity.. The data sheet gives heavy foot traffic after 24 hours. Conditions: At 77°F and 50% relative humidity.. The data sheet gives vehicular traffic after 5 to 7 days, with forklifts at 7 days. Conditions: At 77°F and 50% relative humidity.. The data sheet gives a full cure in 7 days. Conditions: At 77°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
When can a car go back on the AP-91020-AB floor?
The sheet gives vehicular traffic after 5 to 7 days at 77°F and 50% relative humidity, and a full cure in 7 days. Light foot traffic is allowed after 4 to 6 hours.
How long does this product take to fully cure?
Ringsend states: The data sheet gives a full cure in 7 days. Conditions: At 77°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
How long do I have to work with this product?
Ringsend states: The data sheet gives a pot life of 40 to 50 minutes. Conditions: At 73°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
How long until I can put this product into service?
Ringsend states: The data sheet gives vehicular traffic after 5 to 7 days, with forklifts at 7 days. Conditions: At 77°F and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor coating times assume the stated temperature and humidity. Cold slabs, thick coats and damp concrete lengthen them. Follow the current data sheet. Follow the product label for your conditions.