FastFix-110
Polymeric sand (Canada sheet) · CA · manufacturer-sourced
How long before you can walk on Sika FastFix-110?
Short answer
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Sika FastFix-110
- Variant
- Polymeric sand (Canada sheet)
- Region
- CA
- Listed use
- paver joints, driveways
- Timed stages recorded
- light foot, heavy traffic, rain ready
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet v02.01, April 2022
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A polymeric sand that is quick to gel and rain-resistant, but still asks 24 hours dry, 24 to foot traffic and 72 for vehicles. Air must stay above 5°C for 48 hours.
Paver-joint plan
Brush in, wet down, then wait before traffic
- Sweep the Polymeric sand (Canada sheet) into dry joints
- Activate as the label directs
- Keep traffic off until the stated time
This product’s stated stages Quoted at 73°F
- Light foot traffic1 day
- Rain-ready1 day
- Heavy traffic3 days
Worth noticing: Light foot traffic at 1 day; heavy traffic at 3 days.
Common mistake: Letting rain or sprinklers hit joints that have not hardened.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time the paver cure
Your countdown
Stated times
- Light foot traffic1 day
- Heavy traffic3 days
- Rain-safe1 day
From Sika data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: usa.sika.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Paver products need dry joints and a dry-weather window. Cool, damp or shaded sites slow them. Follow the current data sheet.
- Temperature range: 41°F to 95°F
- Region CA. Formulas can differ between countries; check your container.
- Light foot traffic: The source gives no conditions for this time.
- Heavy traffic: Keep sprinklers off for 72 hours.
- Rain-safe: Joints wider than 13 mm need 48 hours.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Using this specific product
Sika FastFix-110 is listed here as the Polymeric sand (Canada sheet) version for paver joints and driveways. For using this product, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Polymeric sand (Canada sheet); related versions can use different timing.
- For paver joints and driveways, pay particular attention to the exact variant, preparation and environmental conditions.
- The source gives no conditions for this time. Keep sprinklers off for 72 hours. Joints wider than 13 mm need 48 hours.
How to check readiness
Check the real material or treated area at the slowest location before the next step. Try a protected edge first and avoid turning, dragging or concentrated loads. Open the area gradually and keep heavy or hot tires off until the full stated milestone. Use this only as the rainfast milestone. It does not establish general cure or re-entry safety.
Avoid this mistake
The first visible change is not always the manufacturer’s final-use milestone.
Compare with similar products
- Compare with Gardner Drive-Seal 4 Blacktop Driveway Filler-SealerLight foot traffic: 4–6 h there, 1 day here.
- Compare with Black Jack (Gardner-Gibson) Drive-Maxx 700 Filler and SealerLight foot traffic: 2–4 h there, 1 day here.
Questions
How long before you can walk on this product?
Sika states: The sheet gives foot traffic 24 hours after drying. Conditions: The source gives no conditions for this time.. The sheet gives vehicle traffic after 72 hours. Conditions: Keep sprinklers off for 72 hours.. The sheet says keep joints dry for at least 24 hours. Conditions: Joints wider than 13 mm need 48 hours.. These are the manufacturer’s stated times, not a guarantee.
When can cars drive on FastFix-110 joints?
The sheet gives 72 hours.
How long before heavy traffic is safe on this product?
Sika states: The sheet gives vehicle traffic after 72 hours. Conditions: Keep sprinklers off for 72 hours.. These are the manufacturer’s stated times, not a guarantee.
How long before this product can get rained on?
Sika states: The sheet says keep joints dry for at least 24 hours. Conditions: Joints wider than 13 mm need 48 hours.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Paver products need dry joints and a dry-weather window. Cool, damp or shaded sites slow them. Follow the current data sheet. Follow the product label for your conditions.