Evolution Polymeric Sand
Polymeric jointing sand for 3 to 100 mm joints · Canada · manufacturer-sourced
How long before you can walk on Sika Evolution Polymeric Sand?
Short answer
Paver-joint plan
Brush in, wet down, then wait before traffic
- Sweep the Polymeric jointing sand for 3 to 100 mm joints into dry joints
- Activate as the label directs
- Keep traffic off until the stated time
This product’s stated stages Quoted at 73°F
- Light foot traffic1 day
- Rain-ready1 day
- Heavy traffic3 days
Worth noticing: Light foot traffic at 1 day; heavy traffic at 3 days.
Common mistake: Letting rain or sprinklers hit joints that have not hardened.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time the paver cure
Your countdown
Stated times
- Light foot traffic1 day
- Heavy traffic3 days
- Rain-safe1 day
From Sika data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: usa.sika.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
- Temperature range: 41°F to 95°F
- Region Canada. Formulas can differ between countries; check your container.
- Light foot traffic: Curing takes longer below 21°C.
- Heavy traffic: Curing takes longer below 21°C.
- Rain-safe: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Sika Evolution Polymeric Sand
- Variant
- Polymeric jointing sand for 3 to 100 mm joints
- Region
- Canada
- Listed use
- paver joints, wide joints up to 100 mm
- Timed stages recorded
- light foot, heavy traffic, rain ready
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Version 01.03, December 2025
Condition attached to the stated time: Curing takes longer below 21°C.
About this product
A jointing sand rated for joints from 3 to 100 mm, with a 24 hour rain rule that doubles to 48 hours for joints wider than 13 mm. Foot traffic waits 24 hours and vehicles 72, and the sprinklers must stay off for 72 hours.
Using this specific product
Sika Evolution Polymeric Sand is listed here as the Polymeric jointing sand for 3 to 100 mm joints version for paver joints and wide joints up to 100 mm. For using this product, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Polymeric jointing sand for 3 to 100 mm joints; related versions can use different timing.
- For paver joints and wide joints up to 100 mm, pay particular attention to the exact variant, preparation and environmental conditions.
- Curing takes longer below 21°C. The source gives no conditions for this time.
How to check readiness
Check the real material or treated area at the slowest location before the next step. Try a protected edge first and avoid turning, dragging or concentrated loads. Open the area gradually and keep heavy or hot tires off until the full stated milestone. Use this only as the rainfast milestone. It does not establish general cure or re-entry safety.
Avoid this mistake
The first visible change is not always the manufacturer’s final-use milestone.
Compare with similar products
- Compare with Alliance Gator GatorSeal Wet LookLight foot traffic: 1 day there, 1 day here.
- Compare with Alliance Gator GatorSeal Signature Natural LookLight foot traffic: 1 day there, 1 day here.
Questions
How long before you can walk on this product?
Sika states: The data sheet says to allow a minimum of 24 hours to cure and harden before opening the area to foot traffic. Conditions: Curing takes longer below 21°C.. The data sheet says to wait at least 72 hours before vehicles use the area. Conditions: Curing takes longer below 21°C.. The data sheet says to protect joints from rain for at least 24 hours after application, 48 hours for joints wider than 13 mm. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
Why does wider joint mean a longer rain wait for Evolution sand?
The data sheet extends the protection from 24 hours to 48 hours for joints wider than 13 mm, and extends the pre-install rain forecast the same way.
How long before heavy traffic is safe on this product?
Sika states: The data sheet says to wait at least 72 hours before vehicles use the area. Conditions: Curing takes longer below 21°C.. These are the manufacturer’s stated times, not a guarantee.
How long before this product can get rained on?
Sika states: The data sheet says to protect joints from rain for at least 24 hours after application, 48 hours for joints wider than 13 mm. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.