Evolution Pro 1 Polymeric Sand
Canada data sheet · CA · manufacturer-sourced
How long before you can walk on Sika Evolution Pro 1 Polymeric Sand?
Short answer
Paver-joint plan
Brush in, wet down, then wait before traffic
- Sweep the Canada data sheet into dry joints
- Activate as the label directs
- Keep traffic off until the stated time
This product’s stated stages
- Light foot traffic1 day
- Rain-ready1 day
- Heavy traffic3 days
Worth noticing: Light foot traffic at 1 day; heavy traffic at 3 days.
Common mistake: Letting rain or sprinklers hit joints that have not hardened.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time the paver cure
Your countdown
Stated times
- Light foot traffic1 day
- Heavy traffic3 days
- Rain-safe1 day
From Sika data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: usa.sika.com
Conditions & fine print
- Stated conditions: Not stated in the data sheet
- Allow longer when temperatures are below 70°F (21°C), and use above 32°F (data sheet). The data sheet also gives a final set time of 220 minutes. Canadian data sheet.
- Apply at 32°F or above
- Region CA. Formulas can differ between countries; check your container.
- Light foot traffic: The source gives no conditions for this time.
- Heavy traffic: The source gives no conditions for this time.
- Rain-safe: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Sika Evolution Pro 1 Polymeric Sand
- Variant
- Canada data sheet
- Region
- CA
- Listed use
- polymeric sand, paver joints
- Timed stages recorded
- light foot, heavy traffic, rain ready
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Aug 2024 v01.01
Condition attached to the stated time: The source gives no conditions for this time.
About this product
Evolution Pro 1 Polymeric Sand is a driveway & paver sealer product from Sika, listed for polymeric sand, paver joints. This page tracks 3 stated steps, from light traffic at 1 day to rain-safe at 1 day. Its times are stated under: The source gives no conditions for this time.
Using this specific product
Sika Evolution Pro 1 Polymeric Sand is listed here as the Canada data sheet version for polymeric sand and paver joints. For using this product, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Canada data sheet; related versions can use different timing.
- For polymeric sand and paver joints, pay particular attention to the exact variant, preparation and environmental conditions.
- The source gives no conditions for this time.
How to check readiness
Check the real material or treated area at the slowest location before the next step. Try a protected edge first and avoid turning, dragging or concentrated loads. Open the area gradually and keep heavy or hot tires off until the full stated milestone. Use this only as the rainfast milestone. It does not establish general cure or re-entry safety.
Avoid this mistake
The first visible change is not always the manufacturer’s final-use milestone.
Compare with similar products
- Compare with Alliance Gator GatorSeal Satin LookLight foot traffic: 1 day there, 1 day here.
- Compare with Alliance Gator GatorSeal Wet LookLight foot traffic: 1 day there, 1 day here.
Questions
How long before you can walk on this product?
Sika states: The data sheet gives 24 hours of drying before foot traffic. Conditions: The source gives no conditions for this time.. The data sheet gives 72 hours before vehicle traffic. Conditions: The source gives no conditions for this time.. The data sheet says to protect the joints from rain for a minimum of 24 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How does Evolution Pro 1 Polymeric Sand compare with other driveway & paver sealer products?
Sika states 1 day for light traffic, right at the median of 1 day across 3 driveway & paver sealer products here. The quickest listed is Gardner Drive-Seal 4 Blacktop Driveway Filler-Sealer at 4 hours; the slowest is Sika Evolution Pro Plus 4 Polymeric Sand at 1 day.
Is there a faster Sika driveway & paver sealer option?
This is the quickest of the 2 Sika driveway & paver sealer products listed here for light traffic (1 day).
What conditions do the stated times for Evolution Pro 1 Polymeric Sand assume?
Stated conditions: The source gives no conditions for this time. Application temperature: 32°F or higher. Cooler, damper or thicker applications usually take longer.
How long before heavy traffic is safe on this product?
Sika states: The data sheet gives 72 hours before vehicle traffic. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long before this product can get rained on?
Sika states: The data sheet says to protect the joints from rain for a minimum of 24 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Allow longer when temperatures are below 70°F (21°C), and use above 32°F (data sheet). The data sheet also gives a final set time of 220 minutes. Canadian data sheet. Follow the product label for your conditions.