Pavefix Plus
Paving joint compound (UK) · GB · manufacturer-sourced
How long does Sika Pavefix Plus take to dry?
Short answer
All stated times for Pavefix Plus
| Milestone | Time | Condition |
|---|---|---|
| Set / hardened | 6–12 hours | The source gives no conditions for this time. |
| Curing period complete | 14 days | The source gives no conditions for this time. |
| Full cure | 4 days | The source gives no conditions for this time. |
Source: Technical data sheet SKPAV1, v1 9/7/14.
Paver-joint plan
Brush in, wet down, then wait before traffic
- Sweep the Paving joint compound (UK) into dry joints
- Activate as the label directs
- Keep traffic off until the stated time
This product’s stated stages Quoted at 73°F
- Set6–12 hours
- Full cure4 days
- Curing period2 weeks
Worth noticing: Set at 6–12 hours; curing period at 2 weeks.
Common mistake: Letting rain or sprinklers hit joints that have not hardened.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time the paver cure
Your countdown
Stated times
- Set / hardened6–12 hours
- Curing period complete14 days
- Full cure4 days
From Sika data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: usa.sika.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Paver products need dry joints and a dry-weather window. Cool, damp or shaded sites slow them. Follow the current data sheet.
- Apply at 39°F or above
- Region GB. Formulas can differ between countries; check your container.
- Set / hardened: The source gives no conditions for this time.
- Curing period complete: The source gives no conditions for this time.
- Full cure: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Sika Pavefix Plus
- Variant
- Paving joint compound (UK)
- Region
- GB
- Listed use
- paving joints, driveways
- Timed stages recorded
- set, cure period, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet SKPAV1, v1 9/7/14
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A ready-to-use joint compound with a long wait before pressure washing: 14 days. Initial set is 6 to 12 hours above 15°C.
Using this specific product
Sika Pavefix Plus is listed here as the Paving joint compound (UK) version for paving joints and driveways. For using this product, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Paving joint compound (UK); related versions can use different timing.
- For paving joints and driveways, pay particular attention to the exact variant, preparation and environmental conditions.
- The source gives no conditions for this time.
How to check readiness
Check the real material or treated area at the slowest location before the next step. The sheet gives an initial set in 6 to 12 hours above 15°C in dry conditions. The sheet says no pressure washing for 14 days. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.
Avoid this mistake
The first visible change is not always the manufacturer’s final-use milestone.
Compare with similar products
- Compare with Parex KerbfixSet: 20 min there, 6–12 h here.
- Compare with Sakrete (Sika) Paver Set Polymeric SandSet: 2 days there, 6–12 h here.
Questions
How long does this product take to dry?
Sika states: The sheet gives an initial set in 6 to 12 hours above 15°C in dry conditions. Conditions: The source gives no conditions for this time.. The sheet says no pressure washing for 14 days. Conditions: The source gives no conditions for this time.. The sheet gives a full cure of up to 4 days at 4 to 15°C. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
When can I pressure wash Sika Pavefix Plus joints?
The sheet says not until 14 days of cure.
How long does this product take to fully cure?
Sika states: The sheet gives a full cure of up to 4 days at 4 to 15°C. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Paver products need dry joints and a dry-weather window. Cool, damp or shaded sites slow them. Follow the current data sheet. Follow the product label for your conditions.