Lumbersider Low Sheen
Exterior low-sheen acrylic (D34) · AU · manufacturer-sourced
How long before you can recoat Resene Lumbersider Low Sheen?
Short answer
Coat-by-coat plan
Touch-dry, recoat and washable are three different dates
- Cut in and roll the Exterior low-sheen acrylic (D34) in even coats
- Wait for the recoat time, not touch-dry
- Hold off scrubbing until the cure time
This product’s stated stages Quoted at 64°F
- Fully dry45 minutes
- Ready for another coat2 hours
Worth noticing: Fully dry at 45 minutes; ready for another coat at 2 hours.
Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.
Coat timeline
Plan the next coat and final use separately
- 1ApplyUse the Exterior low-sheen acrylic (D34) directions and prepare for weatherboards and exterior timber.
- 2Next coatUse the listed recoat milestone; do not substitute touch-dry time.
- 3Normal useWait for the applicable handling, water or cure milestone.
Plan the next coat
Your countdown
Stated times
- Ready for another coat2 hours
- Fully dry45 minutes
From Resene data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: resene.com.au
Conditions & fine print
- Stated conditions: 64°F (18°C)
- Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
- Region AU. Formulas can differ between countries; check your container.
- Ready for another coat: Bare timber takes a Sureseal sealer coat first, which needs 2 hours before the first topcoat.
- Fully dry: At 18°C.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Resene Lumbersider Low Sheen
- Variant
- Exterior low-sheen acrylic (D34)
- Region
- AU
- Listed use
- weatherboards, exterior timber
- Timed stages recorded
- recoat min, full dry
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Data sheet D34, May 2023
Condition attached to the stated time: Bare timber takes a Sureseal sealer coat first, which needs 2 hours before the first topcoat.
About this product
A low-sheen exterior acrylic for weatherboards. The sheet adds a step: a sealer coat that needs 2 hours before the first topcoat.
Using this specific product
Resene Lumbersider Low Sheen is listed here as the Exterior low-sheen acrylic (D34) version for weatherboards and exterior timber. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Exterior low-sheen acrylic (D34); related versions can use different timing.
- For weatherboards and exterior timber, pay particular attention to surface preparation, coat thickness and ventilation.
- Bare timber takes a Sureseal sealer coat first, which needs 2 hours before the first topcoat. At 18°C.
How to check readiness
Test an inconspicuous area for firmness and blocking before normal use. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The sheet gives a minimum dry time of 45 minutes at 18°C.
Avoid this mistake
Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.
Compare with similar products
- Compare with Benjamin Moore Drywall PrimerRecoat: 2 h there, 2 h here.
- Compare with Benjamin Moore Scuff-X Interior PaintRecoat: 2 h there, 2 h here.
Questions
How long before you can recoat this product?
Resene states: The sheet gives a recoat in 2 hours. Conditions: Bare timber takes a Sureseal sealer coat first, which needs 2 hours before the first topcoat.. The sheet gives a minimum dry time of 45 minutes at 18°C. Conditions: At 18°C.. These are the manufacturer’s stated times, not a guarantee.
Does Lumbersider need a primer?
The sheet names a Sureseal sealer coat on bare surfaces, left 2 hours before the first coat.
How long until this product is fully dry?
Resene states: The sheet gives a minimum dry time of 45 minutes at 18°C. Conditions: At 18°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.