Dulux

X-Pert Interior Latex Primer/Sealer 11000

Interior latex primer (Canada) · CA · manufacturer-sourced

Check your container: This countdown is for the Interior latex primer (Canada) variant. Similar-looking versions may have different times.

How long before you can recoat Dulux X-Pert Interior Latex Primer/Sealer 11000?

Short answer

Ready for another coat: 2–4 hours after application.
Safe to touch: 30 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Interior latex primer (Canada) in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 77°F and 50% humidity

  • Safe to touch30 minutes
  • Ready for another coat2–4 hours
  • Full cure2 weeks

Worth noticing: Touch-dry comes at 30 minutes, but full cure is 2 weeks, about 672 times longer.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Ready for another coat2–4 hours
  • Full cure14 days

From Dulux data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: dulux.ca

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label.
  • Temperature range: 50°F to 90°F
  • Region CA. Formulas can differ between countries; check your container.
  • Safe to touch: At 25°C (77°F) and 50% relative humidity.
  • Ready for another coat: At 25°C (77°F) and 50% relative humidity.
  • Full cure: At 25°C (77°F). The sheet doubles times above 50% humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Dulux X-Pert Interior Latex Primer/Sealer 11000
Variant
Interior latex primer (Canada)
Region
CA
Listed use
new drywall, repaints, interior primer
Timed stages recorded
touch, recoat min, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet DC 11000

Condition attached to the stated time: At 25°C (77°F) and 50% relative humidity.

About this product

An interior latex primer that is topcoated in 2 to 4 hours. The 14 day cure matters only if the primed surface is going to be scrubbed.

Using this specific product

Dulux X-Pert Interior Latex Primer/Sealer 11000 is listed here as the Interior latex primer (Canada) version for new drywall, repaints, and interior primer. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Interior latex primer (Canada); related versions can use different timing.
  • For new drywall, repaints, and interior primer, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 25°C (77°F) and 50% relative humidity. At 25°C (77°F). The sheet doubles times above 50% humidity.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Dulux states: The sheet gives touch dry in 30 minutes. Conditions: At 25°C (77°F) and 50% relative humidity.. The sheet gives recoating in 2 to 4 hours. Conditions: At 25°C (77°F) and 50% relative humidity.. The sheet gives full cure in 14 days. Conditions: At 25°C (77°F). The sheet doubles times above 50% humidity.. These are the manufacturer’s stated times, not a guarantee.

How soon can I topcoat Dulux X-Pert Primer 11000?

The sheet gives 2 to 4 hours at 77°F and 50% humidity.

How long does this product take to fully cure?

Dulux states: The sheet gives full cure in 14 days. Conditions: At 25°C (77°F). The sheet doubles times above 50% humidity.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Dulux states: The sheet gives touch dry in 30 minutes. Conditions: At 25°C (77°F) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching