Water-based Polyurethane Floor Enamel 247010
Acrylic poly floor enamel (Canada) · CA · manufacturer-sourced
How long before you can recoat Dulux Water-based Polyurethane Floor Enamel 247010?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Acrylic poly floor enamel (Canada) to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 70°F and 50% humidity
- Safe to touch20–30 minutes
- Ready for another coat4–6 hours
- Curing period2 weeks
Worth noticing: Safe to touch at 20–30 minutes; curing period at 2 weeks.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Time returning to use
Your countdown
Stated times
- Safe to touch20–30 minutes
- Ready for another coat4–6 hours
- Curing period complete14 days
From Dulux data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: dulux.ca
Conditions & fine print
- Stated conditions: 70°F (21°C) and 50% relative humidity
- Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
- Temperature range: 50°F to 86°F
- Region CA. Formulas can differ between countries; check your container.
- Safe to touch: At 70°F (21°C) and 50% relative humidity.
- Ready for another coat: At 70°F (21°C) and 50% relative humidity.
- Curing period complete: At 70°F (21°C) and 50% relative humidity.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Dulux Water-based Polyurethane Floor Enamel 247010
- Variant
- Acrylic poly floor enamel (Canada)
- Region
- CA
- Listed use
- porches, concrete floors, wood floors
- Timed stages recorded
- touch, recoat min, cure period
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet 247010
Condition attached to the stated time: At 70°F (21°C) and 50% relative humidity.
About this product
A water-based floor enamel dry to the touch in half an hour but washed only after 14 days. The sheet applies at 50 to 86°F.
Using this specific product
Dulux Water-based Polyurethane Floor Enamel 247010 is listed here as the Acrylic poly floor enamel (Canada) version for porches, concrete floors, and wood floors. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Acrylic poly floor enamel (Canada); related versions can use different timing.
- For porches, concrete floors, and wood floors, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- At 70°F (21°C) and 50% relative humidity.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The sheet gives 14 days before cleaning.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with Jotun Jotafloor TopcoatRecoat: 7.5 h there, 4–6 h here.
- Compare with Sikafloor-160Recoat: 8 h to 1 day there, 4–6 h here.
Questions
How long before you can recoat this product?
Dulux states: The sheet gives touch dry in 20 to 30 minutes. Conditions: At 70°F (21°C) and 50% relative humidity.. The sheet gives recoating in 4 to 6 hours. Conditions: At 70°F (21°C) and 50% relative humidity.. The sheet gives 14 days before cleaning. Conditions: At 70°F (21°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
When can I mop a floor coated with Dulux Acrylic Poly Floor?
The sheet gives 14 days before cleaning.
How long until this product is safe to touch?
Dulux states: The sheet gives touch dry in 20 to 30 minutes. Conditions: At 70°F (21°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.