Jotafloor Rapid Dry
Fast floor coating (UK copy of sheet) · GB · manufacturer-sourced
How long before you can recoat Jotun Jotafloor Rapid Dry?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Fast floor coating (UK copy of sheet) to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 73°F
- Safe to touch20 minutes
- Light foot traffic1 hour
- Ready for another coat2 hours
Worth noticing: Safe to touch at 20 minutes; ready for another coat at 2 hours.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Safe to touch20 minutes
- Ready for another coat2 hours
- Light foot traffic1 hour
From Jotun data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: industrialcoatingsltd.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
- Region GB. Formulas can differ between countries; check your container.
- Safe to touch: It is 60 minutes at 5°C and 15 minutes at 40°C.
- Ready for another coat: It is 3 hours at 5°C, 2.5 at 10°C and 1 at 40°C.
- Light foot traffic: It is 4 hours at 5°C.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Jotun Jotafloor Rapid Dry
- Variant
- Fast floor coating (UK copy of sheet)
- Region
- GB
- Listed use
- floor coating, fast return
- Timed stages recorded
- touch, recoat min, light foot
- Source checked
- 2026-10-25
Documentation: Technical data sheet copy · Technical data sheet copy, issued 20 Nov 2018
Condition attached to the stated time: It is 60 minutes at 5°C and 15 minutes at 40°C.
About this product
A floor coating where speed is the point: surface dry in 20 minutes and walk-on in 1 hour at 23°C. In the cold at 5°C the walk-on slips to 4 hours.
Using this specific product
Jotun Jotafloor Rapid Dry is listed here as the Fast floor coating (UK copy of sheet) version for floor coating and fast return. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Fast floor coating (UK copy of sheet); related versions can use different timing.
- For floor coating and fast return, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- It is 60 minutes at 5°C and 15 minutes at 40°C. It is 3 hours at 5°C, 2.5 at 10°C and 1 at 40°C. It is 4 hours at 5°C.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Try a protected edge first and avoid turning, dragging or concentrated loads.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with ARDEX WPM 002Recoat: 1–2 h there, 2 h here.
- Compare with Sikafloor-261 CA Thixo LiteRecoat: 8 h there, 2 h here.
Questions
How long before you can recoat this product?
Jotun states: The sheet gives surface dry at 20 minutes at 23°C. Conditions: It is 60 minutes at 5°C and 15 minutes at 40°C.. The sheet gives a minimum overcoat interval of 2 hours at 23°C. Conditions: It is 3 hours at 5°C, 2.5 at 10°C and 1 at 40°C.. The sheet gives walk-on at 1 hour at 23°C. Conditions: It is 4 hours at 5°C.. These are the manufacturer’s stated times, not a guarantee.
How long until you can walk on Jotafloor Rapid Dry?
The sheet gives 1 hour at 23°C and 4 hours at 5°C.
How long before I can walk on tile set with this product?
Jotun states: The sheet gives walk-on at 1 hour at 23°C. Conditions: It is 4 hours at 5°C.. These are the manufacturer’s stated times, not a guarantee.
How long until this product is safe to touch?
Jotun states: The sheet gives surface dry at 20 minutes at 23°C. Conditions: It is 60 minutes at 5°C and 15 minutes at 40°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.