Hi-Glo Acrylic
Water-based gloss (D31) · NZ · manufacturer-sourced
How long before you can recoat Resene Hi-Glo Acrylic?
Short answer
Coat-by-coat plan
Touch-dry, recoat and washable are three different dates
- Cut in and roll the Water-based gloss (D31) in even coats
- Wait for the recoat time, not touch-dry
- Hold off scrubbing until the cure time
This product’s stated stages Quoted at 64°F
- Fully dry45 minutes
- Ready for another coat2 hours
Worth noticing: Fully dry at 45 minutes; ready for another coat at 2 hours.
Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.
Coat timeline
Plan the next coat and final use separately
- 1ApplyUse the Water-based gloss (D31) directions and prepare for trim, doors, and windows.
- 2Next coatUse the listed recoat milestone; do not substitute touch-dry time.
- 3Normal useWait for the applicable handling, water or cure milestone.
Plan the next coat
Your countdown
Stated times
- Ready for another coat2 hours
- Fully dry45 minutes
From Resene data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: resene.co.nz
Conditions & fine print
- Stated conditions: 64°F (18°C)
- Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
- Apply at 50°F or above
- Region NZ. Formulas can differ between countries; check your container.
- Ready for another coat: Do not apply below 10°C.
- Fully dry: At 18°C.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Resene Hi-Glo Acrylic
- Variant
- Water-based gloss (D31)
- Region
- NZ
- Listed use
- trim, doors, windows
- Timed stages recorded
- recoat min, full dry
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Data sheet D31, Apr 2010
Condition attached to the stated time: Do not apply below 10°C.
About this product
A water-based gloss that dries in 45 minutes and recoats in 2 hours, quick compared with the solvent enamels in the Resene group.
Using this specific product
Resene Hi-Glo Acrylic is listed here as the Water-based gloss (D31) version for trim, doors, and windows. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Water-based gloss (D31); related versions can use different timing.
- For trim, doors, and windows, pay particular attention to surface preparation, coat thickness and ventilation.
- Do not apply below 10°C. At 18°C.
How to check readiness
Test an inconspicuous area for firmness and blocking before normal use. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The sheet gives a minimum dry time of 45 minutes at 18°C.
Avoid this mistake
Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.
Compare with similar products
- Compare with Benjamin Moore ben Interior PaintRecoat: 2 h there, 2 h here.
- Compare with Benjamin Moore Drywall PrimerRecoat: 2 h there, 2 h here.
Questions
How long before you can recoat this product?
Resene states: The sheet gives a recoat in 2 hours. Conditions: Do not apply below 10°C.. The sheet gives a minimum dry time of 45 minutes at 18°C. Conditions: At 18°C.. These are the manufacturer’s stated times, not a guarantee.
How fast does Resene Hi-Glo Acrylic dry?
The sheet gives 45 minutes at 18°C, and a 2 hour recoat.
How long until this product is fully dry?
Resene states: The sheet gives a minimum dry time of 45 minutes at 18°C. Conditions: At 18°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.