BEHR

BEHR Premium Semi-Transparent Waterproofing Stain & Sealer

Exterior wood stain, Canadian sheet · CA · manufacturer-sourced

Check your container: This countdown is for the Exterior wood stain, Canadian sheet variant. Similar-looking versions may have different times.

How long before you can recoat BEHR Premium Semi-Transparent Waterproofing Stain & Sealer?

Short answer

Ready for another coat: 1–2 hours after application.
Light foot traffic: 1–2 days after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Exterior wood stain, Canadian sheet thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 73°F and 50% humidity

  • Ready for another coat1–2 hours
  • Light foot traffic1–2 days
  • Full cure3 days

Worth noticing: You can recoat at 1–2 hours, but the film is not fully cured until 3 days.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Wood finish

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Exterior wood stain, Canadian sheet directions and prepare for deck, fence, and siding.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Ready for another coat1–2 hours
  • Light foot traffic1–2 days
  • Full cure3 days

From BEHR data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: behr.com

Conditions & fine print
  • Stated conditions: 73°F (23°C) and 50% relative humidity
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Temperature range: 40°F to 90°F
  • Region CA. Formulas can differ between countries; check your container.
  • Ready for another coat: At 25°C (77°F) and 50% relative humidity.
  • Light foot traffic: At 25°C (77°F) and 50% relative humidity.
  • Full cure: At 25°C (77°F) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
BEHR BEHR Premium Semi-Transparent Waterproofing Stain & Sealer
Variant
Exterior wood stain, Canadian sheet
Region
CA
Listed use
deck, fence, siding
Timed stages recorded
recoat min, light foot, full cure
Source checked
2026-10-25

Documentation: Technical data sheet copy · Data sheet, revised 6/2020 (Canada)

Condition attached to the stated time: At 25°C (77°F) and 50% relative humidity.

About this product

The Canadian sheet for a semi-transparent deck stain. It pairs a short 1 to 2 hour recoat with a longer 24 to 48 hour wait for light foot traffic and 72 hours for full cure.

Using this specific product

BEHR BEHR Premium Semi-Transparent Waterproofing Stain & Sealer is listed here as the Exterior wood stain, Canadian sheet version for deck, fence, and siding. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Exterior wood stain, Canadian sheet; related versions can use different timing.
  • For deck, fence, and siding, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • At 25°C (77°F) and 50% relative humidity.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Try a protected edge first and avoid turning, dragging or concentrated loads. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

BEHR states: The data sheet gives 1 to 2 hours before recoating. Conditions: At 25°C (77°F) and 50% relative humidity.. The data sheet gives 24 to 48 hours before light foot traffic. Conditions: At 25°C (77°F) and 50% relative humidity.. The data sheet gives 72 hours for full cure. Conditions: At 25°C (77°F) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

When can I walk on a deck stained with BEHR Premium Semi-Transparent Waterproofing Stain?

The Canadian data sheet gives light foot traffic after 24 to 48 hours, and 72 hours for full cure. Recoating is allowed after 1 to 2 hours.

How long does this product take to fully cure?

BEHR states: The data sheet gives 72 hours for full cure. Conditions: At 25°C (77°F) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long before I can walk on tile set with this product?

BEHR states: The data sheet gives 24 to 48 hours before light foot traffic. Conditions: At 25°C (77°F) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All wood finishes