Mohawk Finishing

Waterborne Pre-Catalyzed Lacquer Gloss (M640-21807)

Waterborne lacquer · US · manufacturer-sourced

Check your container: This countdown is for the Waterborne lacquer variant. Similar-looking versions may have different times.

How long before you can recoat Mohawk Finishing Waterborne Pre-Catalyzed Lacquer Gloss (M640-21807)?

Short answer

Ready for another coat: 1 hour after application.
Safe to handle: 20 minutes after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Waterborne lacquer thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 77°F and 45% humidity

  • Safe to handle20 minutes
  • Ready for another coat1 hour

Worth noticing: Safe to handle at 20 minutes; ready for another coat at 1 hour.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Wood finish

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Waterborne lacquer directions and prepare for waterborne lacquer, gloss finish, and cabinet finish.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to handle20 minutes
  • Ready for another coat1 hour

From Mohawk Finishing data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: mohawk-finishing.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 45% relative humidity
  • Drying times change with temperature, humidity, film build and airflow. Follow the current data sheet.
  • Region US. Formulas can differ between countries; check your container.
  • Safe to handle: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.
  • Ready for another coat: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Mohawk Finishing Waterborne Pre-Catalyzed Lacquer Gloss (M640-21807)
Variant
Waterborne lacquer
Region
US
Listed use
waterborne lacquer, gloss finish, cabinet finish
Timed stages recorded
handle, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet · No date on the sheet

Condition attached to the stated time: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.

About this product

The gloss sheen of Mohawk's waterborne pre-catalyzed lacquer. It adds a 20 minute handling time that the satin sheet does not list.

Using this specific product

Mohawk Finishing Waterborne Pre-Catalyzed Lacquer Gloss (M640-21807) is listed here as the Waterborne lacquer version for waterborne lacquer, gloss finish, and cabinet finish. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Waterborne lacquer; related versions can use different timing.
  • For waterborne lacquer, gloss finish, and cabinet finish, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. Lift or move the item gently and avoid twisting the bond or pressing finished faces together. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Mohawk Finishing states: The data sheet gives 20 minutes to handle. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. The data sheet says to dry a minimum of 1 hour, then scuff sand before recoating. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What does the gloss waterborne lacquer list that the satin one does not?

A handling time. The gloss data sheet says '20 minutes to handle' under air dry, in addition to the same 1 hour minimum recoat with a scuff sand. The satin sheet lists only the recoat line.

How long until this product is safe to handle?

Mohawk Finishing states: The data sheet gives 20 minutes to handle. Conditions: Tested in the laboratory at 77°F (25°C) and about 45% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Drying times change with temperature, humidity, film build and airflow. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All wood finishes