MAPEI

Planibond EBA

Spanish data sheet · US · manufacturer-sourced

Check your container: This countdown is for the Spanish data sheet variant. Similar-looking versions may have different times.

How long does MAPEI Planibond EBA take to dry?

Short answer

Set / hardened: 3 hours after application.
Full cure: 15 days after application.
Epoxy

Two-part cure ladder

Pot life, set and full cure all run off the mix time

  1. Mix the Spanish data sheet in the exact ratio
  2. Work inside the pot life
  3. Do not load until the stated cure

This product’s stated stages

  • Working time ends50 minutes
  • Set3 hours
  • Full cure15 days

Worth noticing: Working time is only 50 minutes; the next stated stage, set, is 3 hours.

Common mistake: Mixing a large batch in a warm room; the pot life is shorter than the sheet suggests.

Epoxy

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Spanish data sheet version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time the epoxy cure

When did you mix the epoxy?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends50 minutes
  • Set / hardened3 hours
  • Full cure15 days

From MAPEI data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: mapei.com

Conditions & fine print
  • Stated conditions: Not stated in the data sheet
  • Pot life and cure time shorten in heat, with larger mixed batches and in thick sections. Follow the current data sheet for mixing, surface preparation and loading. Retailer-hosted Spanish data sheet from 2011; use 50 to 95°F and check the current sheet.
  • Temperature range: 50°F to 95°F
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: At 73°F (23°C); about 2 hours at 50°F and 20 minutes at 86°F.
  • Set / hardened: At 73°F (23°C); about 5 hours at 50°F and 2 hours at 86°F.
  • Full cure: At 68°F (20°C).
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
MAPEI Planibond EBA
Variant
Spanish data sheet
Region
US
Listed use
epoxy bonding agent, concrete repair
Timed stages recorded
tooling, set, full cure
Source checked
2026-10-25

Documentation: Technical data sheet copy · 22 July 2011

Condition attached to the stated time: At 73°F (23°C); about 2 hours at 50°F and 20 minutes at 86°F.

About this product

Planibond EBA is an epoxy product from MAPEI, listed for epoxy bonding agent, concrete repair. Its set time of 3 hours is shorter than 22% of the 32 epoxy products here that list one. Its times are stated under: At 73°F (23°C); about 2 hours at 50°F and 20 minutes at 86°F.

Using this specific product

MAPEI Planibond EBA is listed here as the Spanish data sheet version for epoxy bonding agent and concrete repair. For mixing and curing epoxy, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Spanish data sheet; related versions can use different timing.
  • For epoxy bonding agent and concrete repair, pay particular attention to mix ratio, batch size, temperature and pour thickness.
  • At 73°F (23°C); about 2 hours at 50°F and 20 minutes at 86°F. At 73°F (23°C); about 5 hours at 50°F and 2 hours at 86°F. At 68°F (20°C).

How to check readiness

Check the coolest or thickest part for firmness before sanding, demolding or loading. The Spanish data sheet gives a pot life of about 50 minutes. The data sheet gives about 3 hours of open time. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

A larger batch can heat faster while a thin film may cure more slowly.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

MAPEI states: The Spanish data sheet gives a pot life of about 50 minutes. Conditions: At 73°F (23°C); about 2 hours at 50°F and 20 minutes at 86°F.. The data sheet gives about 3 hours of open time. Conditions: At 73°F (23°C); about 5 hours at 50°F and 2 hours at 86°F.. The data sheet gives 15 days for the final cure. Conditions: At 68°F (20°C).. These are the manufacturer’s stated times, not a guarantee.

How does Planibond EBA compare with other epoxy products?

MAPEI states 3 hours for set, which is slower than the typical epoxy product here (median 17 minutes across 32 products). The quickest listed is J-B Weld MinuteWeld Syringe at 1 minute; the slowest is WEST SYSTEM 105/209 Extra Slow Hardener at 20 hours.

What conditions do the stated times for Planibond EBA assume?

Stated conditions: At 73°F (23°C); about 2 hours at 50°F and 20 minutes at 86°F; At 73°F (23°C); about 5 hours at 50°F and 2 hours at 86°F; At 68°F (20°C). Application temperature: 50 to 95°F. Cooler, damper or thicker applications usually take longer.

How long does this product take to fully cure?

MAPEI states: The data sheet gives 15 days for the final cure. Conditions: At 68°F (20°C).. These are the manufacturer’s stated times, not a guarantee.

How long do I have to work with this product?

MAPEI states: The Spanish data sheet gives a pot life of about 50 minutes. Conditions: At 73°F (23°C); about 2 hours at 50°F and 20 minutes at 86°F.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Pot life and cure time shorten in heat, with larger mixed batches and in thick sections. Follow the current data sheet for mixing, surface preparation and loading. Retailer-hosted Spanish data sheet from 2011; use 50 to 95°F and check the current sheet. Follow the product label for your conditions.

Similar products

All epoxies