MAPEI

Adeflex Trade

Flexible waterproofing membrane · AU · manufacturer-sourced

Check your container: This countdown is for the Flexible waterproofing membrane variant. Similar-looking versions may have different times.

How long before you can walk on MAPEI Adeflex Trade?

Short answer

Light foot traffic: 1 day after application.
Roof coatings and roofing sealants

Weather-window plan

Rain-ready comes long before fully cured

  1. Apply the Flexible waterproofing membrane to a dry, clean roof surface
  2. Keep rain off for the stated period
  3. Allow foot traffic only at the stated time

This product’s stated stages Quoted at 73°F

  • Working time ends20 minutes
  • Light foot traffic1 day
  • Normal use2 weeks

Worth noticing: Working time is only 20 minutes; the next stated stage, light foot traffic, is 1 day.

Common mistake: Starting a coat when the afternoon forecast turns wet.

Roof coatings and roofing sealants

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Flexible waterproofing membrane directions and prepare for balconies and waterproofing.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan around the weather

When did you apply the coating?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends20 minutes
  • Light foot traffic1 day
  • Normal use14 days

From MAPEI data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: mapei.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
  • Region AU. Formulas can differ between countries; check your container.
  • Working time ends: The source gives no conditions for this time.
  • Light foot traffic: The source gives no conditions for this time.
  • Normal use: The page's closest match to cure; it gives no cure label.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
MAPEI Adeflex Trade
Variant
Flexible waterproofing membrane
Region
AU
Listed use
balconies, waterproofing
Timed stages recorded
tooling, light foot, normal use
Source checked
2026-10-25

Documentation: Technical data sheet · Product page (no revision)

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A waterproofing membrane with an 8 hour pot life, a 20 minute open time and a 14 day wait before use. The page lists no conditions for any figure.

Using this specific product

MAPEI Adeflex Trade is listed here as the Flexible waterproofing membrane version for balconies and waterproofing. For coating or sealing a roof, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Flexible waterproofing membrane; related versions can use different timing.
  • For balconies and waterproofing, pay particular attention to roof temperature, dew, rain in the forecast, film thickness and how many coats are needed.
  • The source gives no conditions for this time. The page's closest match to cure; it gives no cure label.

How to check readiness

Check that the surface is dry and that no rain or dew is forecast inside the stated window. The page gives an open time of 20 minutes. Try a protected edge first and avoid turning, dragging or concentrated loads. The page gives ready for use at 14 days.

Avoid this mistake

Rain resistance and walkable are earlier milestones than the full cure the roof system is rated for.

Compare with similar products

Keep going

Questions

How long before you can walk on this product?

MAPEI states: The page gives an open time of 20 minutes. Conditions: The source gives no conditions for this time.. The page gives light foot traffic after 24 hours. Conditions: The source gives no conditions for this time.. The page gives ready for use at 14 days. Conditions: The page's closest match to cure; it gives no cure label.. These are the manufacturer’s stated times, not a guarantee.

How long is the pot life of Adeflex Trade?

The page gives 8 hours.

How long do I have to work with this product?

MAPEI states: The page gives an open time of 20 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All roof coatings and roofing sealants