Mapegum WPS
Liquid waterproofing membrane · INTL · manufacturer-sourced
How long before you can tile over MAPEI Mapegum WPS?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Liquid waterproofing membrane to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 73°F
- Ready for another coat1 hour
- Fully dry5 hours
- Ready for tile12 hours to 1 day
Worth noticing: Ready for another coat at 1 hour; ready for tile at 12 hours to 1 day.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Ready for another coat1 hour
- Ready for tile12 hours to 1 day
- Fully dry5 hours
From MAPEI data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: mapei.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Floor coating times assume the stated temperature and humidity. Cold slabs, thick coats and damp concrete lengthen them. Follow the current data sheet.
- Temperature range: 41°F to 95°F
- Region INTL. Formulas can differ between countries; check your container.
- Ready for another coat: At +23°C.
- Ready for tile: At +23°C.
- Fully dry: At +23°C.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- MAPEI Mapegum WPS
- Variant
- Liquid waterproofing membrane
- Region
- INTL
- Listed use
- waterproofing membrane
- Timed stages recorded
- recoat min, tile ready, full dry
- Source checked
- 2026-10-25
Documentation: Technical data sheet copy · UK edition 2014-06-2022
Condition attached to the stated time: At +23°C.
About this product
A liquid waterproofing membrane on a UK data sheet, so temperatures are in Celsius: apply from +5 to +35°C. The wait to tile is 12 to 24 hours, but over non-absorbent substrates the sheet asks for 4 to 5 days. The membrane is completely dry at 1 mm in 5 hours.
Using this specific product
MAPEI Mapegum WPS is listed here as the Liquid waterproofing membrane version for waterproofing membrane. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Liquid waterproofing membrane; related versions can use different timing.
- For waterproofing membrane, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- At +23°C.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The data sheet gives a wait of 12 to 24 hours before laying coating material, and 4 to 5 days over non-absorbent substrates. The data sheet gives completely dry at 1 mm thickness in 5 hours.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with LATICRETE Primer PlusRecoat: 1–3 h there, 1 h here.
- Compare with LATICRETE SPARTACOTE FLEX SBRecoat: 1–2 h there, 1 h here.
Questions
How long before you can tile over this product?
MAPEI states: The data sheet gives about 60 minutes between the first and second coats, when touch dry. Conditions: At +23°C.. The data sheet gives a wait of 12 to 24 hours before laying coating material, and 4 to 5 days over non-absorbent substrates. Conditions: At +23°C.. The data sheet gives completely dry at 1 mm thickness in 5 hours. Conditions: At +23°C.. These are the manufacturer’s stated times, not a guarantee.
Why does Mapegum WPS give two different waits before tiling?
It gives 12 to 24 hours before laying coating material generally, and 4 to 5 days where the substrate is non-absorbent, because the membrane dries more slowly without absorption.
How long before I can apply a second coat of this product?
MAPEI states: The data sheet gives about 60 minutes between the first and second coats, when touch dry. Conditions: At +23°C.. These are the manufacturer’s stated times, not a guarantee.
How long until this product is fully dry?
MAPEI states: The data sheet gives completely dry at 1 mm thickness in 5 hours. Conditions: At +23°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor coating times assume the stated temperature and humidity. Cold slabs, thick coats and damp concrete lengthen them. Follow the current data sheet. Follow the product label for your conditions.