Haymes

Artisan Rendercoat

Textured render coat (Australia) · AU · manufacturer-sourced

Check your container: This countdown is for the Textured render coat (Australia) variant. Similar-looking versions may have different times.

How long before you can recoat Haymes Artisan Rendercoat?

Short answer

Ready for another coat: 1 day after application.
Safe to touch: 4 hours after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Textured render coat (Australia) in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 77°F

  • Safe to touch4 hours
  • Ready for another coat1 day
  • Rain-ready1 day
  • Curing period4 weeks

Worth noticing: Safe to touch at 4 hours; curing period at 4 weeks.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Textured render coat (Australia) directions and prepare for textured render and exterior walls.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch4 hours
  • Ready for another coat1 day
  • Rain-safe1 day
  • Curing period complete28 days

From Haymes data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: haymespaint.com.au

Conditions & fine print
  • Stated conditions: 77°F (25°C)
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Region AU. Formulas can differ between countries; check your container.
  • Safe to touch: The source gives no conditions for this time.
  • Ready for another coat: The source gives no conditions for this time.
  • Rain-safe: The source gives no conditions for this time.
  • Curing period complete: This is a substrate wait.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Haymes Artisan Rendercoat
Variant
Textured render coat (Australia)
Region
AU
Listed use
textured render, exterior walls
Timed stages recorded
touch, recoat min, rain ready, cure period
Source checked
2026-10-25

Documentation: Technical data sheet · Product data sheet, 13 Aug 2021

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A textured render coat that waits on the wall, not just the coating: new concrete must be 28 days old before application.

Using this specific product

Haymes Artisan Rendercoat is listed here as the Textured render coat (Australia) version for textured render and exterior walls. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Textured render coat (Australia); related versions can use different timing.
  • For textured render and exterior walls, pay particular attention to surface preparation, coat thickness and ventilation.
  • The source gives no conditions for this time. This is a substrate wait.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Use this only as the rainfast milestone. It does not establish general cure or re-entry safety.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Haymes states: The sheet gives touch dry at 4 hours. Conditions: The source gives no conditions for this time.. The sheet gives recoating after 24 hours. Conditions: The source gives no conditions for this time.. The sheet says no rain or dew for 24 hours. Conditions: The source gives no conditions for this time.. The sheet says new concrete must be 28 days old. Conditions: This is a substrate wait.. These are the manufacturer’s stated times, not a guarantee.

How old must new concrete be before Artisan Rendercoat?

The sheet gives 28 days.

How long before this product can get rained on?

Haymes states: The sheet says no rain or dew for 24 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Haymes states: The sheet gives touch dry at 4 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching