Haymes

Artisan Base Coat

Decorative base coat (Australia) · AU · manufacturer-sourced

Check your container: This countdown is for the Decorative base coat (Australia) variant. Similar-looking versions may have different times.

How long before you can recoat Haymes Artisan Base Coat?

Short answer

Ready for another coat: 2 hours after application.
Safe to touch: 20 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Decorative base coat (Australia) in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 77°F

  • Safe to touch20 minutes
  • Ready for another coat2 hours

Worth noticing: Safe to touch at 20 minutes; ready for another coat at 2 hours.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Decorative base coat (Australia) directions and prepare for decorative finishes and feature walls.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch20 minutes
  • Ready for another coat2 hours

From Haymes data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: haymespaint.com.au

Conditions & fine print
  • Stated conditions: 77°F (25°C)
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Region AU. Formulas can differ between countries; check your container.
  • Safe to touch: The source gives no conditions for this time.
  • Ready for another coat: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Haymes Artisan Base Coat
Variant
Decorative base coat (Australia)
Region
AU
Listed use
decorative finishes, feature walls
Timed stages recorded
touch, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet · Product data sheet, 24 Jan 2022

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A base coat for decorative finishes, touch dry in 20 minutes and ready for the effect coat after 2 hours.

Using this specific product

Haymes Artisan Base Coat is listed here as the Decorative base coat (Australia) version for decorative finishes and feature walls. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Decorative base coat (Australia); related versions can use different timing.
  • For decorative finishes and feature walls, pay particular attention to surface preparation, coat thickness and ventilation.
  • The source gives no conditions for this time.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Haymes states: The sheet gives touch dry at 20 minutes at 25°C and 50% humidity. Conditions: The source gives no conditions for this time.. The sheet gives recoating after 2 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

When can the effect coat go over Haymes Artisan Base Coat?

The sheet gives recoating after 2 hours.

How long until this product is safe to touch?

Haymes states: The sheet gives touch dry at 20 minutes at 25°C and 50% humidity. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching