AG707X-RM 100% Solids Epoxy Base Coat
Armor Chip granite floor kit · US · manufacturer-sourced
How long before you can recoat Armor Garage AG707X-RM 100% Solids Epoxy Base Coat?
Short answer
Two-part cure ladder
Pot life, set and full cure all run off the mix time
- Mix the Armor Chip granite floor kit in the exact ratio
- Work inside the pot life
- Do not load until the stated cure
This product’s stated stages Quoted at 77°F and 50% humidity
- Working time ends30 minutes
- Tack-free4–6 hours
- Ready for another coat12 hours
- Recoat window closes1 day
- Heavy traffic2–3 days
- Full cure7 days
Worth noticing: Recoat inside the window: not before 12 hours and not after 1 day.
Common mistake: Mixing a large batch in a warm room; the pot life is shorter than the sheet suggests.
Bond-strength path
Assembly, handling and full load are different stages
Time the epoxy cure
Your countdown
Stated times
- Working time ends30 minutes
- Tack-free4–6 hours
- Recoat window closes1 day
- Ready for another coat12 hours
- Heavy traffic2–3 days
- Full cure7 days
From Armor Garage data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: armorgarage.com
Conditions & fine print
- Stated conditions: 77°F (25°C) and 50% relative humidity
- Cure times are approximate and change with temperature and humidity. Follow the current kit instructions.
- Region US. Formulas can differ between countries; check your container.
- Working time ends: At 77°F (25°C) and 50% relative humidity.
- Tack-free: At 77°F (25°C) and 50% relative humidity.
- Recoat window closes: At 77°F (25°C) and 50% relative humidity.
- Ready for another coat: At 77°F (25°C) and 50% relative humidity.
- Heavy traffic: At 77°F (25°C) and 50% relative humidity.
- Full cure: At 77°F (25°C) and 50% relative humidity.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Armor Garage AG707X-RM 100% Solids Epoxy Base Coat
- Variant
- Armor Chip granite floor kit
- Region
- US
- Listed use
- garage floor epoxy, floor coating, granite flake floor
- Timed stages recorded
- tooling, tack free, recoat max, recoat min, heavy traffic
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Version 1 2025 (Rev 11/21)
Condition attached to the stated time: At 77°F (25°C) and 50% relative humidity.
About this product
The 100% solids epoxy base coat of Armor Garage's granite floor kit. Its 30 minute pot life and 12 to 24 hour recoat window are tight, so the data sheet's schedule is worth planning around before mixing.
Using this specific product
Armor Garage AG707X-RM 100% Solids Epoxy Base Coat is listed here as the Armor Chip granite floor kit version for garage floor epoxy, floor coating, and granite flake floor. For mixing and curing epoxy, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Armor Chip granite floor kit; related versions can use different timing.
- For garage floor epoxy, floor coating, and granite flake floor, pay particular attention to mix ratio, batch size, temperature and pour thickness.
- At 77°F (25°C) and 50% relative humidity.
How to check readiness
Check the coolest or thickest part for firmness before sanding, demolding or loading. The data sheet gives a pot life of 30 minutes. The data sheet gives a tack-free time of 4 to 6 hours. The data sheet gives a maximum of 24 hours before recoating.
Avoid this mistake
A larger batch can heat faster while a thin film may cure more slowly.
Compare with similar products
- Compare with Sikafloor-161Recoat: 12 h there, 12 h here.
- Compare with System Three S-1 Clear Penetrating Epoxy SealerRecoat: 12 h to 1 day there, 12 h here.
Questions
How long before you can recoat this product?
Armor Garage states: The data sheet gives a pot life of 30 minutes. Conditions: At 77°F (25°C) and 50% relative humidity.. The data sheet gives a tack-free time of 4 to 6 hours. Conditions: At 77°F (25°C) and 50% relative humidity.. The data sheet gives a maximum of 24 hours before recoating. Conditions: At 77°F (25°C) and 50% relative humidity.. The data sheet gives a minimum of 12 hours before recoating. Conditions: At 77°F (25°C) and 50% relative humidity.. The data sheet gives 48 to 72 hours before vehicle traffic. Conditions: At 77°F (25°C) and 50% relative humidity.. The data sheet gives 7 days for the full cure schedule. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
What happens if I miss the 24 hour recoat window on the Armor Garage base coat?
The data sheet lists a recoat window of 12 hours minimum to 24 hours maximum at 77°F and 50% humidity. It does not say what to do after 24 hours here; follow the kit instructions or ask Armor Garage.
How long does this product take to fully cure?
Armor Garage states: The data sheet gives 7 days for the full cure schedule. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
How long do I have to work with this product?
Armor Garage states: The data sheet gives a pot life of 30 minutes. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
How long before heavy traffic is safe on this product?
Armor Garage states: The data sheet gives 48 to 72 hours before vehicle traffic. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Cure times are approximate and change with temperature and humidity. Follow the current kit instructions. Follow the product label for your conditions.