TEC (H.B. Fuller)

AccuColor Premium Unsanded Grout (620)

Powder · US · manufacturer-sourced

Check your container: This countdown is for the Powder variant. Similar-looking versions may have different times.

How long before you can walk on TEC (H.B. Fuller) AccuColor Premium Unsanded Grout (620)?

Short answer

Light foot traffic: 1 day after application.
Immersion-ready: 3 days after application.
Grout & tile mortar

Grout wait-and-wash

Wipe-off, light foot traffic and sealing each have their own wait

  1. Pack the joints with Powder
  2. Wipe off inside the stated window
  3. Seal and use only after the stated cure

This product’s stated stages

  • Light foot traffic1 day
  • Immersion-ready3 days
  • Full cure3 weeks

Worth noticing: Light foot traffic at 1 day; full cure at 3 weeks.

Common mistake: Sealing or soaking a grout joint that has set but not fully dried.

Grout & tile mortar

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Time the grout cure

When was the grout applied?
Conditions that affect drying
Where?
Thickness

Stated times

  • Light foot traffic1 day
  • Immersion-ready3 days
  • Full cure21 days

From TEC (H.B. Fuller) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: tecspecialty.com

Conditions & fine print
  • Stated conditions: Not stated in the data sheet
  • Times depend on temperature, humidity, substrate and tile type. Follow the current data sheet for your exact setting bed and application.
  • Temperature range: 50°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Light foot traffic: The source gives no conditions for this time.
  • Immersion-ready: The source gives no conditions for this time.
  • Full cure: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
TEC (H.B. Fuller) AccuColor Premium Unsanded Grout (620)
Variant
Powder
Region
US
Listed use
unsanded grout, wall grout, tile grout
Timed stages recorded
light foot, immersion, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · DS620 R0925-20

Condition attached to the stated time: The source gives no conditions for this time.

About this product

The unsanded counterpart to TEC 650, intended for narrow joints. Its cleanup window is shorter: the grout firms in 15 to 30 minutes under the data sheet's conditions.

Using this specific product

TEC (H.B. Fuller) AccuColor Premium Unsanded Grout (620) is listed here as the Powder version for unsanded grout, wall grout, and tile grout. For grouting tile, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Powder; related versions can use different timing.
  • For unsanded grout, wall grout, and tile grout, pay particular attention to joint depth, water ratio, cleanup and room conditions.
  • The source gives no conditions for this time.

How to check readiness

Inspect shaded joints and verify the stated water or traffic milestone. Try a protected edge first and avoid turning, dragging or concentrated loads. Continuous immersion is more demanding than splashes; wait for the specific immersion milestone. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Color change alone does not prove the joint is ready for immersion.

Compare with similar products

Keep going

Questions

How long before you can walk on this product?

TEC (H.B. Fuller) states: The data sheet says to protect the installation from traffic or impact for at least 24 hours. Conditions: The source gives no conditions for this time.. The data sheet says to protect the grout from water immersion or freezing for at least 72 hours. Conditions: The source gives no conditions for this time.. The data sheet gives 21 days for the final cure. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

Why does unsanded TEC 620 firm up faster than sanded 650?

The data sheet gives 15 to 30 minutes of firm-up for 620 grout mixed with water or liquid latex, against 30 to 60 minutes for the sanded 650 grout mixed with water. The data sheet then allows an extra hour before removing remaining haze.

What does the damp cure on TEC 620 involve?

The data sheet describes covering the tile and grout with a single layer of 40 pound natural kraft paper for 72 hours, misting periodically, as the damp-cure method.

How long does this product take to fully cure?

TEC (H.B. Fuller) states: The data sheet gives 21 days for the final cure. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

How long before this product can be immersed in water?

TEC (H.B. Fuller) states: The data sheet says to protect the grout from water immersion or freezing for at least 72 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Times depend on temperature, humidity, substrate and tile type. Follow the current data sheet for your exact setting bed and application. Follow the product label for your conditions.

Similar products

All grout and tile mortar