Starlike EVO
Epoxy grout · US · manufacturer-sourced
How long before you can grout over Litokol Starlike EVO?
Short answer
Grout wait-and-wash
Wipe-off, light foot traffic and sealing each have their own wait
- Pack the joints with Epoxy grout
- Wipe off inside the stated window
- Seal and use only after the stated cure
This product’s stated stages Quoted at 73°F
- Working time ends1 hour
- Ready for grout1 day
- Light foot traffic1 day
- Normal use5 days
Worth noticing: Working time is only 1 hour; the next stated stage, ready for grout, is 1 day.
Common mistake: Sealing or soaking a grout joint that has set but not fully dried.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time the grout cure
Your countdown
Stated times
- Working time ends1 hour
- Ready for grout1 day
- Light foot traffic1 day
- Normal use5 days
From Litokol data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: litokol.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet.
- Region US. Formulas can differ between countries; check your container.
- Working time ends: At 23°C.
- Ready for grout: It is 4 hours on fast adhesive and 7 to 10 days on mortar.
- Light foot traffic: At 23°C.
- Normal use: At 23°C.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Litokol Starlike EVO
- Variant
- Epoxy grout
- Region
- US
- Listed use
- epoxy tile grout, commercial kitchens
- Timed stages recorded
- tooling, grout ready, light foot, normal use
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Application instructions (undated)
Condition attached to the stated time: At 23°C.
About this product
An epoxy grout where the wait to grout depends on what holds the tile: 4 hours on fast adhesive, 24 on normal, 7 to 10 days on mortar.
Using this specific product
Litokol Starlike EVO is listed here as the Epoxy grout version for epoxy tile grout and commercial kitchens. For grouting tile, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Epoxy grout; related versions can use different timing.
- For epoxy tile grout and commercial kitchens, pay particular attention to joint depth, water ratio, cleanup and room conditions.
- At 23°C. It is 4 hours on fast adhesive and 7 to 10 days on mortar.
How to check readiness
Inspect shaded joints and verify the stated water or traffic milestone. The sheet gives a pot life of about 1 hour. The sheet gives floor grouting after 24 hours on normal adhesive. Try a protected edge first and avoid turning, dragging or concentrated loads.
Avoid this mistake
Color change alone does not prove the joint is ready for immersion.
Compare with similar products
- Compare with MAPEI Flexcolor CQ Ready-to-Use GroutLight foot traffic: 1 day there, 1 day here.
- Compare with MAPEI FugolasticLight foot traffic: 1 day there, 1 day here.
Questions
How long before you can grout over this product?
Litokol states: The sheet gives a pot life of about 1 hour. Conditions: At 23°C.. The sheet gives floor grouting after 24 hours on normal adhesive. Conditions: It is 4 hours on fast adhesive and 7 to 10 days on mortar.. The sheet gives light foot traffic at 24 hours. Conditions: At 23°C.. The sheet gives ready for use at 5 days. Conditions: At 23°C.. These are the manufacturer’s stated times, not a guarantee.
How long after tiling can I grout with Starlike EVO?
The sheet gives 24 hours on normal adhesive, 4 on fast adhesive and 7 to 10 days on mortar.
How long do I have to work with this product?
Litokol states: The sheet gives a pot life of about 1 hour. Conditions: At 23°C.. These are the manufacturer’s stated times, not a guarantee.
How long before I can walk on tile set with this product?
Litokol states: The sheet gives light foot traffic at 24 hours. Conditions: At 23°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Tile adhesive times assume the stated temperature on an absorbent substrate. Dense tiles, damp or cold rooms and thick beds lengthen them. Follow the current data sheet. Follow the product label for your conditions.