StoColor Dryonic
Moisture-managing facade coating · US · manufacturer-sourced
How long does StoColor Dryonic take to dry?
Short answer
Coat-by-coat plan
Touch-dry, recoat and washable are three different dates
- Cut in and roll the Moisture-managing facade coating in even coats
- Wait for the recoat time, not touch-dry
- Hold off scrubbing until the cure time
This product’s stated stages Quoted at 70°F
- Fully dry1 day
Worth noticing: The manufacturer states only one timing here (fully dry, 1 day); nothing else is inferred.
Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.
Coat timeline
Plan the next coat and final use separately
- 1ApplyUse the Moisture-managing facade coating directions and prepare for facade coating and wall coating.
- 2Next coatUse the listed recoat milestone; do not substitute touch-dry time.
- 3Normal useWait for the applicable handling, water or cure milestone.
Plan the next coat
Your countdown
Stated times
- Fully dry1 day
From Sto data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: stocorp.com
Conditions & fine print
- Stated conditions: 70°F (21°C)
- Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
- Temperature range: 40°F to 100°F
- Region US. Formulas can differ between countries; check your container.
- Fully dry: At 70°F and 50% humidity; the surface must be 5°F above the dew point.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Sto StoColor Dryonic
- Variant
- Moisture-managing facade coating
- Region
- US
- Listed use
- facade coating, wall coating
- Timed stages recorded
- full dry
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Product bulletin A6.0, 09/2022
Condition attached to the stated time: At 70°F and 50% humidity; the surface must be 5°F above the dew point.
About this product
A facade coating with a dew-point rule: the surface has to be 5°F above it, as well as in a 40 to 100°F range.
Using this specific product
Sto StoColor Dryonic is listed here as the Moisture-managing facade coating version for facade coating and wall coating. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Moisture-managing facade coating; related versions can use different timing.
- For facade coating and wall coating, pay particular attention to surface preparation, coat thickness and ventilation.
- At 70°F and 50% humidity; the surface must be 5°F above the dew point.
How to check readiness
Test an inconspicuous area for firmness and blocking before normal use. The sheet says the coating dries within 24 hours.
Avoid this mistake
Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.
Compare with similar products
- Compare with DAP Plastic Wood All Purpose Wood FillerFully dry: 1.5 days there, 1 day here.
- Compare with DAP Flexible Floor Patch and LevelerFully dry: 6 h there, 1 day here.
Questions
How long does this product take to dry?
Sto states: The sheet says the coating dries within 24 hours. Conditions: At 70°F and 50% humidity; the surface must be 5°F above the dew point.. These are the manufacturer’s stated times, not a guarantee.
What dew-point rule applies to StoColor Dryonic?
The sheet requires the surface to be 5°F above the dew point.
What affects how long this product takes to dry or cure?
Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.