Soudal

Grip All

Solvent-based grab adhesive (UK) · GB · manufacturer-sourced

Check your container: This countdown is for the Solvent-based grab adhesive (UK) variant. Similar-looking versions may have different times.

How long does Soudal Grip All take to dry?

Short answer

Safe to handle: 20 minutes after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the Solvent-based grab adhesive (UK)
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 73°F

  • Working time ends15 minutes
  • Safe to handle20 minutes

Worth noticing: Working time is only 15 minutes; the next stated stage, safe to handle, is 20 minutes.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends15 minutes
  • Safe to handle20 minutes

From Soudal data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: soudal.co.uk

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
  • Temperature range: 41°F to 86°F
  • Region GB. Formulas can differ between countries; check your container.
  • Working time ends: The source gives no conditions for this time.
  • Safe to handle: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Soudal Grip All
Variant
Solvent-based grab adhesive (UK)
Region
GB
Listed use
panelling, skirting, mouldings
Timed stages recorded
tooling, handle
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet F0014291

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A grab adhesive that is hand tight in 20 minutes, with a 15 minute open time. The sheet has parts dry for 10 to 15 minutes before rebonding and battening.

Using this specific product

Soudal Grip All is listed here as the Solvent-based grab adhesive (UK) version for panelling, skirting, and mouldings. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Solvent-based grab adhesive (UK); related versions can use different timing.
  • For panelling, skirting, and mouldings, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • The source gives no conditions for this time.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The sheet gives an open time of about 15 minutes. Lift or move the item gently and avoid twisting the bond or pressing finished faces together.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

Soudal states: The sheet gives an open time of about 15 minutes. Conditions: The source gives no conditions for this time.. The sheet says hand tight in 20 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

How fast does Soudal Grip All grab?

The sheet says hand tight in 20 minutes.

How long do I have to work with this product?

Soudal states: The sheet gives an open time of about 15 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All adhesives and glues