Loctite (Henkel)

PL 400 Subfloor Construction Adhesive

Tan · US · not yet reviewed

Check your container: This countdown is for the Tan variant. Similar-looking versions may have different times.

How long does Loctite (Henkel) PL 400 Subfloor Construction Adhesive take to dry?

Short answer

Full cure: 2–7 days after application.
Working time ends: 15 minutes after application.
Used for structural applications, load-bearing bonds: elapsed time alone can’t confirm it’s ready. Inspect or test before loading.
Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Tan version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Calculate bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends15 minutes
  • Full cure2–7 days

From Loctite (Henkel) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: loctiteproducts.com

Conditions & fine print
  • Stated conditions: 78°F (25°C) and 50% relative humidity
  • Times depend on temperature, humidity, substrate porosity and amount used. Apply between 0°F and 100°F.
  • Temperature range: 0°F to 100°F
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: 78°F and 50% RH
  • Full cure: 78°F and 50% RH; depends on humidity, porosity and amount used
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

Loctite (Henkel) PL 400 Subfloor Construction Adhesive is listed here as the Tan version for subfloor, floor joists, and plywood. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Tan; related versions can use different timing.
  • For subfloor, floor joists, and plywood, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • 78°F and 50% RH. 78°F and 50% RH; depends on humidity, porosity and amount used.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. Working time: 15 minutes. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Handling strength and full load strength are different milestones.

Questions

How long does this product take to dry?

Loctite (Henkel) states: Cure time: 2–7 days. Conditions: 78°F and 50% RH; depends on humidity, porosity and amount used. Working time: 15 minutes. Conditions: 78°F and 50% RH. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to fully cure?

Loctite (Henkel) states: Cure time: 2–7 days. Conditions: 78°F and 50% RH; depends on humidity, porosity and amount used. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Times depend on temperature, humidity, substrate porosity and amount used. Apply between 0°F and 100°F. Application temperature: 0°F to 100°F. Follow the product label for your conditions.

Similar products

All adhesives and glues