Smooth-On

Ecoflex GEL

Ecoflex · US · manufacturer-sourced

Check your container: This countdown is for the Ecoflex variant. Similar-looking versions may have different times.

How long before you can demold Smooth-On Ecoflex GEL?

Short answer

Ready to demold: 2 hours after application.
Maker & casting resin

Cast-and-demold plan

Gel, demold and full cure are separate days

  1. Mix the Ecoflex to ratio and pour
  2. Wait for the demold time
  3. Sand or finish after full cure

This product’s stated stages

  • Working time ends15 minutes
  • Demold2 hours

Worth noticing: Working time is only 15 minutes; the next stated stage, demold, is 2 hours.

Common mistake: Demolding early and leaving a soft, tacky casting that never fully hardens.

Maker & casting resin

Project stage ladder

Demolding, handling, finishing and final use may occur at different times

ShapeSetFinishUse

For mold making, identify which stage the stated to demold 2 hours milestone actually unlocks. Earlier handling does not prove final cure.

Time demold and cure

When did you mix and pour?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends15 minutes
  • Ready to demold2 hours

From Smooth-On data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: smooth-on.com

Conditions & fine print
  • Stated conditions: Not stated in the data sheet
  • Pot life and cure time shorten in warm rooms and with bigger batches. Follow the current technical bulletin for mix ratio, mixing and release agents. The chart is a summary; read the product's technical bulletin before you pour.
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: The chart gives no temperature.
  • Ready to demold: The chart gives no temperature; its cure column is the last time value in each row.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Smooth-On Ecoflex GEL
Variant
Ecoflex
Region
US
Listed use
mold making
Timed stages recorded
tooling, demold
Source checked
2026-10-25

Documentation: Technical data sheet · Technical Data Chart (no revision date)

Condition attached to the stated time: The chart gives no temperature.

About this product

Ecoflex GEL is a platinum-cure silicone rubber on Smooth-On's technical data chart, listed with a pot life of 15 minutes and a cure time of 2 hours. Its pot life ranks as the shortest in its group. This page uses only those two chart values; mix ratio, hardness and release details come from Smooth-On's product bulletin.

Using this specific product

Smooth-On Ecoflex GEL is listed here as the Ecoflex version for mold making. For casting resin, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Ecoflex; related versions can use different timing.
  • For mold making, pay particular attention to accurate mixing, mold material, mass and room temperature.
  • The chart gives no temperature. The chart gives no temperature; its cure column is the last time value in each row.

How to check readiness

Check the casting itself for flex or tack before demolding. The technical data chart gives a pot life of 15 minutes. Flex the mold away at one edge and stop if the casting bends, tears or remains tacky.

Avoid this mistake

Demold time is not necessarily full mechanical cure.

Compare with similar products

Keep going

Questions

How long before you can demold this product?

Smooth-On states: The technical data chart gives a pot life of 15 minutes. Conditions: The chart gives no temperature.. The technical data chart gives a cure time of 2 hours. Conditions: The chart gives no temperature; its cure column is the last time value in each row.. These are the manufacturer’s stated times, not a guarantee.

How does Ecoflex GEL compare with its siblings in the same line?

On Smooth-On's technical data chart, Ecoflex GEL lists a pot life of 15 minutes and a cure time of 2 hours. Within the Ecoflex group the shortest pot life is Ecoflex GEL (15 minutes) and the longest is Ecoflex 00-30 (45 minutes); cure times run from Ecoflex GEL 2 (50 minutes) to Ecoflex 00-10 (4 hours).

How long after the pot life ends does Ecoflex GEL take to cure?

The chart gives a pot life of 15 minutes and a cure time of 2 hours. If the cure clock starts at mixing, that is about 1 hour 45 minutes after the pot life ends. The chart does not state a temperature for these values, so treat that gap as a planning number, not a promise.

How long do I have to work with this product?

Smooth-On states: The technical data chart gives a pot life of 15 minutes. Conditions: The chart gives no temperature.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Pot life and cure time shorten in warm rooms and with bigger batches. Follow the current technical bulletin for mix ratio, mixing and release agents. The chart is a summary; read the product's technical bulletin before you pour. Follow the product label for your conditions.