FlowCast
Deep-pour casting resin · CA · manufacturer-sourced
How long before you can demold EcoPoxy FlowCast?
Short answer
Cast-and-demold plan
Gel, demold and full cure are separate days
- Mix the Deep-pour casting resin to ratio and pour
- Wait for the demold time
- Sand or finish after full cure
This product’s stated stages Quoted at 70°F and 50% humidity
- Tack-free20–44 hours
- Set44 hours
- Demold3 days
- Full cure7 days to 2 weeks
Worth noticing: Tack-free at 20–44 hours; full cure at 7 days to 2 weeks.
Common mistake: Demolding early and leaving a soft, tacky casting that never fully hardens.
Time demold and cure
Your countdown
Stated times
- Tack-free20–44 hours
- Set / hardened44 hours
- Ready to demold3 days
- Full cure7–14 days
From EcoPoxy data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: ecopoxy.com
Conditions & fine print
- Stated conditions: 70°F (21°C) and 50% relative humidity
- Casting resins cure faster and hotter in large or warm pours. Follow the current data sheet and pour limits.
- Region CA. Formulas can differ between countries; check your container.
- Tack-free: At 21°C and 50% relative humidity, for a 1.5 inch pour.
- Set / hardened: At 21°C and 50% relative humidity, for a 1.5 inch pour.
- Ready to demold: At 21°C and 50% relative humidity, for a 1.5 inch pour.
- Full cure: At 21°C and 50% relative humidity, for a 1.5 inch pour.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- EcoPoxy FlowCast
- Variant
- Deep-pour casting resin
- Region
- CA
- Listed use
- river tables, deep pours, casting
- Timed stages recorded
- tack free, set, demold, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet v2.3 (09/22/23)
Condition attached to the stated time: At 21°C and 50% relative humidity, for a 1.5 inch pour.
About this product
A casting resin with a long pot life of 8 to 12 hours and a 3 day demold. Thinner pours cure more slowly and thicker ones run hot, so the 1.5 inch reference matters.
Using this specific product
EcoPoxy FlowCast is listed here as the Deep-pour casting resin version for river tables, deep pours, and casting. For casting resin, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Deep-pour casting resin; related versions can use different timing.
- For river tables, deep pours, and casting, pay particular attention to accurate mixing, mold material, mass and room temperature.
- At 21°C and 50% relative humidity, for a 1.5 inch pour.
How to check readiness
Check the casting itself for flex or tack before demolding. The sheet gives a tacky stage from 20 to 44 hours. The sheet gives set at 44 hours. Flex the mold away at one edge and stop if the casting bends, tears or remains tacky.
Avoid this mistake
Demold time is not necessarily full mechanical cure.
Compare with similar products
- Compare with Copps Industries Diamond Clear Casting ResinTack-free: 1 day to 2 days there, 20 h to 1.83333 days here.
- Compare with Passeport Elite Casting EpoxyTack-free: 3–4 days there, 20 h to 1.83333 days here.
Questions
How long before you can demold this product?
EcoPoxy states: The sheet gives a tacky stage from 20 to 44 hours. Conditions: At 21°C and 50% relative humidity, for a 1.5 inch pour.. The sheet gives set at 44 hours. Conditions: At 21°C and 50% relative humidity, for a 1.5 inch pour.. The sheet gives demolding at 3 days. Conditions: At 21°C and 50% relative humidity, for a 1.5 inch pour.. The sheet gives full cure in 7 to 14 days. Conditions: At 21°C and 50% relative humidity, for a 1.5 inch pour.. These are the manufacturer’s stated times, not a guarantee.
When can I demold EcoPoxy FlowCast?
The sheet gives 3 days at 21°C for a 1.5 inch pour.
How long does this product take to fully cure?
EcoPoxy states: The sheet gives full cure in 7 to 14 days. Conditions: At 21°C and 50% relative humidity, for a 1.5 inch pour.. These are the manufacturer’s stated times, not a guarantee.
How long until this product is tack-free?
EcoPoxy states: The sheet gives a tacky stage from 20 to 44 hours. Conditions: At 21°C and 50% relative humidity, for a 1.5 inch pour.. These are the manufacturer’s stated times, not a guarantee.
How long until this product is set or hard?
EcoPoxy states: The sheet gives set at 44 hours. Conditions: At 21°C and 50% relative humidity, for a 1.5 inch pour.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Casting resins cure faster and hotter in large or warm pours. Follow the current data sheet and pour limits. Follow the product label for your conditions.