Casting Epoxy
Deep-pour casting epoxy (Canada) · CA · manufacturer-sourced
How long does Passeport Elite Casting Epoxy take to dry?
Short answer
Cast-and-demold plan
Gel, demold and full cure are separate days
- Mix the Deep-pour casting epoxy (Canada) to ratio and pour
- Wait for the demold time
- Sand or finish after full cure
This product’s stated stages Quoted at 77°F
- Tack-free3–4 days
- Safe to handle84 hours
- Full cure7 days
Worth noticing: Tack-free at 3–4 days; full cure at 7 days.
Common mistake: Demolding early and leaving a soft, tacky casting that never fully hardens.
Time demold and cure
Your countdown
Stated times
- Tack-free3–4 days
- Safe to handle84 hours
- Full cure7 days
From Passeport Elite data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: None
Conditions & fine print
- Stated conditions: 77°F (25°C)
- Casting resins cure faster and hotter in large or warm pours. Follow the current data sheet and pour limits.
- Region CA. Formulas can differ between countries; check your container.
- Tack-free: At 25°C.
- Safe to handle: At 25°C.
- Full cure: At 25°C.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Passeport Elite Casting Epoxy
- Variant
- Deep-pour casting epoxy (Canada)
- Region
- CA
- Listed use
- river tables, deep castings, bar tops
- Timed stages recorded
- tack free, handle, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical sheet 08/2020
Condition attached to the stated time: At 25°C.
About this product
A slow casting epoxy for deep pours: tack-free in 3 to 4 days, handled after 84 hours and fully cured at 7 days. The sheet caps each layer at 3 inches.
Using this specific product
Passeport Elite Casting Epoxy is listed here as the Deep-pour casting epoxy (Canada) version for river tables, deep castings, and bar tops. For casting resin, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Deep-pour casting epoxy (Canada); related versions can use different timing.
- For river tables, deep castings, and bar tops, pay particular attention to accurate mixing, mold material, mass and room temperature.
- At 25°C.
How to check readiness
Check the casting itself for flex or tack before demolding. The sheet gives tack-free in 72 to 96 hours. Lift or move the item gently and avoid twisting the bond or pressing finished faces together. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.
Avoid this mistake
Demold time is not necessarily full mechanical cure.
Compare with similar products
- Compare with Copps Industries Diamond Clear Casting ResinTack-free: 1 day to 2 days there, 3–4 days here.
- Compare with EcoPoxy FlowCastTack-free: 20 h to 1.83333 days there, 3–4 days here.
Questions
How long does this product take to dry?
Passeport Elite states: The sheet gives tack-free in 72 to 96 hours. Conditions: At 25°C.. The sheet gives a minimum of 84 hours before handling. Conditions: At 25°C.. The sheet gives full cure in 7 days. Conditions: At 25°C.. These are the manufacturer’s stated times, not a guarantee.
How long is Passeport Elite Casting Epoxy tacky?
The sheet gives tack-free in 72 to 96 hours at 25°C.
How long does this product take to fully cure?
Passeport Elite states: The sheet gives full cure in 7 days. Conditions: At 25°C.. These are the manufacturer’s stated times, not a guarantee.
How long until this product is safe to handle?
Passeport Elite states: The sheet gives a minimum of 84 hours before handling. Conditions: At 25°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Casting resins cure faster and hotter in large or warm pours. Follow the current data sheet and pour limits. Follow the product label for your conditions.