Butcher Block Oil
Food-safe butcher block oil (Canada) · CA · manufacturer-sourced
How long should you soak items with Passeport Elite Butcher Block Oil?
Short answer
Food-contact cure plan
Dry is not the same as safe for food
- Apply the Food-safe butcher block oil (Canada) as directed
- Let each coat dry fully
- Use for food only once the stated cure is complete
This product’s stated stages Quoted at 77°F and 50% humidity
- Soak time5–10 minutes
- Fully dry6–8 hours
Worth noticing: Soak time at 5–10 minutes; fully dry at 6–8 hours.
Common mistake: Serving food on a finish that only meets the dry time; use the cure time the maker states.
Time the food-safe wait
Your countdown
Stated times
- Soak complete5–10 minutes
- Fully dry6–8 hours
From Passeport Elite data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: None
Conditions & fine print
- Stated conditions: 77°F (25°C) and 50% relative humidity
- Oil finishes cure from the surface down. Warm, dry, ventilated rooms speed them. Follow the current data sheet and label.
- Region CA. Formulas can differ between countries; check your container.
- Soak complete: The source gives no conditions for this time.
- Fully dry: At 25°C and 50% relative humidity.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Passeport Elite Butcher Block Oil
- Variant
- Food-safe butcher block oil (Canada)
- Region
- CA
- Listed use
- cutting boards, butcher blocks, wooden utensils
- Timed stages recorded
- soak complete, full dry
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical sheet 03/2022
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A food-contact oil with a short soak and a half-day dry. Two coats are specified, so a board is oiled one evening and ready the next day.
Using this specific product
Passeport Elite Butcher Block Oil is listed here as the Food-safe butcher block oil (Canada) version for cutting boards, butcher blocks, and wooden utensils. For finishing a food-contact item, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Food-safe butcher block oil (Canada); related versions can use different timing.
- For cutting boards, butcher blocks, and wooden utensils, pay particular attention to thin even coats, ventilation and the full cure instruction.
- The source gives no conditions for this time. At 25°C and 50% relative humidity.
How to check readiness
Wait for the manufacturer’s food-contact or full-cure milestone before use. Keep the item submerged as directed, but do not exceed a stated maximum. The sheet gives dry in 6 to 8 hours.
Avoid this mistake
Dry-to-touch does not establish food-contact readiness.
Questions
How long should you soak items with this product?
Passeport Elite states: The sheet gives a soak of 5 to 10 minutes before wiping. Conditions: The source gives no conditions for this time.. The sheet gives dry in 6 to 8 hours. Conditions: At 25°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
How long does Butcher Block Oil take to dry?
The sheet gives 6 to 8 hours at 25°C and 50% humidity.
How long until this product is fully dry?
Passeport Elite states: The sheet gives dry in 6 to 8 hours. Conditions: At 25°C and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Oil finishes cure from the surface down. Warm, dry, ventilated rooms speed them. Follow the current data sheet and label. Follow the product label for your conditions.