Smooth-On

Dragon Skin 20 NV

Platinum silicone rubber · US · manufacturer-sourced

Check your container: This countdown is for the Platinum silicone rubber variant. Similar-looking versions may have different times.

How long before you can demold Smooth-On Dragon Skin 20 NV?

Short answer

Ready to demold: 30 minutes after application.
Maker & casting resin

Cast-and-demold plan

Gel, demold and full cure are separate days

  1. Mix the Platinum silicone rubber to ratio and pour
  2. Wait for the demold time
  3. Sand or finish after full cure

This product’s stated stages Quoted at 73°F

  • Working time ends6 minutes
  • Demold30 minutes

Worth noticing: Working time is only 6 minutes; the next stated stage, demold, is 30 minutes.

Common mistake: Demolding early and leaving a soft, tacky casting that never fully hardens.

Maker & casting resin

Project stage ladder

Demolding, handling, finishing and final use may occur at different times

ShapeSetFinishUse

For mold making, silicone casting, and prosthetics, identify which stage the stated to demold 30 minutes milestone actually unlocks. Earlier handling does not prove final cure.

Time demold and cure

When did you mix and pour?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends6 minutes
  • Ready to demold30 minutes

From Smooth-On data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: smooth-on.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Pot life and cure time shorten in warm rooms and with bigger batches. Follow the current technical bulletin for mix ratio, mixing and release agents. The chart is a summary.
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: The source gives no conditions for this time.
  • Ready to demold: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Smooth-On Dragon Skin 20 NV
Variant
Platinum silicone rubber
Region
US
Listed use
mold making, silicone casting, prosthetics
Timed stages recorded
tooling, demold
Source checked
2026-10-25

Documentation: Technical data sheet · Technical Data Chart (no revision date)

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A fast platinum silicone. Its 6 minute pot life and 30 minute cure are much quicker than the 25 minutes and 4 hours of the standard Dragon Skin 20 row, which the site already has.

Using this specific product

Smooth-On Dragon Skin 20 NV is listed here as the Platinum silicone rubber version for mold making, silicone casting, and prosthetics. For casting resin, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Platinum silicone rubber; related versions can use different timing.
  • For mold making, silicone casting, and prosthetics, pay particular attention to accurate mixing, mold material, mass and room temperature.
  • The source gives no conditions for this time.

How to check readiness

Check the casting itself for flex or tack before demolding. The technical data chart gives a pot life of 6 minutes. Flex the mold away at one edge and stop if the casting bends, tears or remains tacky.

Avoid this mistake

Demold time is not necessarily full mechanical cure.

Compare with similar products

Keep going

Questions

How long before you can demold this product?

Smooth-On states: The technical data chart gives a pot life of 6 minutes. Conditions: The source gives no conditions for this time.. The technical data chart gives a cure time of 30 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

How much faster is Dragon Skin 20 NV than Dragon Skin 20?

On the chart, NV has a 6 minute pot life and a 30 minute cure. Dragon Skin 20 has 25 minutes and 4 hours.

How long do I have to work with this product?

Smooth-On states: The technical data chart gives a pot life of 6 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Pot life and cure time shorten in warm rooms and with bigger batches. Follow the current technical bulletin for mix ratio, mixing and release agents. The chart is a summary. Follow the product label for your conditions.