Sika

SikaTack Move Global 30

Windscreen adhesive · GB · manufacturer-sourced

Check your container: This countdown is for the Windscreen adhesive variant. Similar-looking versions may have different times.

How long does SikaTack Move Global 30 take to dry?

Short answer

Tack-free: 10 minutes after application.
Return to service: 30 minutes after application.
Car care

Vehicle-care clock

Wash, wax and weather have different waits

  1. Apply the Windscreen adhesive to a clean, cool panel
  2. Respect the wait before the next layer
  3. Keep it dry and clean until the stated time

This product’s stated stages Quoted at 73°F

  • Working time ends5 minutes
  • Tack-free10 minutes
  • Return to service30 minutes

Worth noticing: Working time is only 5 minutes; the next stated stage, tack-free, is 10 minutes.

Common mistake: Washing or parking under trees the same day, before the film has set.

Car care

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Windscreen adhesive directions and prepare for windscreen bonding and fast turnaround.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Time the next car-care step

When did you apply it to the vehicle?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends5 minutes
  • Tack-free10 minutes
  • Return to service30 minutes

From Sika data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: usa.sika.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
  • Temperature range: -4°F to 122°F
  • Region GB. Formulas can differ between countries; check your container.
  • Working time ends: It is shorter in hot, humid weather.
  • Tack-free: The source gives no conditions for this time.
  • Return to service: Valid from -20 to 50°C.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Sika SikaTack Move Global 30
Variant
Windscreen adhesive
Region
GB
Listed use
windscreen bonding, fast turnaround
Timed stages recorded
tooling, tack free, return service
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet v03.01, April 2023

Condition attached to the stated time: It is shorter in hot, humid weather.

About this product

A windscreen adhesive with a 5 minute open time, so the glass must go on fast, but a 30 minute drive-away that holds from -20 to 50°C.

Using this specific product

Sika SikaTack Move Global 30 is listed here as the Windscreen adhesive version for windscreen bonding and fast turnaround. For working on a vehicle finish, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Windscreen adhesive; related versions can use different timing.
  • For windscreen bonding and fast turnaround, pay particular attention to panel temperature, shade, film thickness and weather.
  • It is shorter in hot, humid weather. The source gives no conditions for this time. Valid from -20 to 50°C.

How to check readiness

Check the coolest panel and avoid water until the stated exposure time. The sheet gives an open time of 5 minutes. The sheet gives skin time of 10 minutes at 23°C and 50% humidity. The sheet gives safe drive-away time of 30 minutes with or without an airbag.

Avoid this mistake

Dew, rain and washing are different exposures; follow the exact product instruction.

Keep going

Questions

How long does this product take to dry?

Sika states: The sheet gives an open time of 5 minutes. Conditions: It is shorter in hot, humid weather.. The sheet gives skin time of 10 minutes at 23°C and 50% humidity. Conditions: The source gives no conditions for this time.. The sheet gives safe drive-away time of 30 minutes with or without an airbag. Conditions: Valid from -20 to 50°C.. These are the manufacturer’s stated times, not a guarantee.

What is the open time of SikaTack Move Global 30?

The sheet gives 5 minutes at 23°C and 50% humidity.

How long do I have to work with this product?

Sika states: The sheet gives an open time of 5 minutes. Conditions: It is shorter in hot, humid weather.. These are the manufacturer’s stated times, not a guarantee.

How long until I can put this product into service?

Sika states: The sheet gives safe drive-away time of 30 minutes with or without an airbag. Conditions: Valid from -20 to 50°C.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.