Evercoat

Rage Ultra Xtra Body Filler

Lightweight body filler · US · manufacturer-sourced

Check your container: This countdown is for the Lightweight body filler variant. Similar-looking versions may have different times.

How long before you can sand Evercoat Rage Ultra Xtra Body Filler?

Short answer

Ready to sand: 2 hours after application.
Car care

Vehicle-care clock

Wash, wax and weather have different waits

  1. Apply the Lightweight body filler to a clean, cool panel
  2. Respect the wait before the next layer
  3. Keep it dry and clean until the stated time

This product’s stated stages Quoted at 75°F

  • Working time ends40 minutes
  • Ready to sand2 hours

Worth noticing: Working time is only 40 minutes; the next stated stage, ready to sand, is 2 hours.

Common mistake: Washing or parking under trees the same day, before the film has set.

Car care

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Lightweight body filler directions and prepare for dent repair, auto body, and filler.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Time the next car-care step

When did you apply it to the vehicle?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends40 minutes
  • Ready to sand2 hours

From Evercoat data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: evercoat.com

Conditions & fine print
  • Stated conditions: 75°F (24°C)
  • Body filler hardens faster in warm rooms and with more hardener. Follow the current data sheet.
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: At 75°F. About 80 minutes at 60°F and 13 minutes at 105°F for the Xtra.
  • Ready to sand: At 72°F (22°C).
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Evercoat Rage Ultra Xtra Body Filler
Variant
Lightweight body filler
Region
US
Listed use
dent repair, auto body, filler
Timed stages recorded
tooling, sand
Source checked
2026-10-25

Documentation: Technical data sheet · TDS 100-131-100144, 6.2022

Condition attached to the stated time: At 75°F. About 80 minutes at 60°F and 13 minutes at 105°F for the Xtra.

About this product

A body filler whose data sheet is a temperature ladder: working time swings from about 80 minutes at 60°F to 13 minutes at 105°F. Sand time is 120 minutes at 72°F, and the sheet says to adjust by chart in other conditions.

Using this specific product

Evercoat Rage Ultra Xtra Body Filler is listed here as the Lightweight body filler version for dent repair, auto body, and filler. For working on a vehicle finish, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Lightweight body filler; related versions can use different timing.
  • For dent repair, auto body, and filler, pay particular attention to panel temperature, shade, film thickness and weather.
  • At 75°F. About 80 minutes at 60°F and 13 minutes at 105°F for the Xtra. At 72°F (22°C).

How to check readiness

Check the coolest panel and avoid water until the stated exposure time. The data sheet gives a working time of up to 40 minutes at 75°F. The data sheet gives a sand time of 120 minutes.

Avoid this mistake

Dew, rain and washing are different exposures; follow the exact product instruction.

Keep going

Questions

How long before you can sand this product?

Evercoat states: The data sheet gives a working time of up to 40 minutes at 75°F. Conditions: At 75°F. About 80 minutes at 60°F and 13 minutes at 105°F for the Xtra.. The data sheet gives a sand time of 120 minutes. Conditions: At 72°F (22°C).. These are the manufacturer’s stated times, not a guarantee.

How does Rage Ultra Xtra working time change in a hot garage?

The sheet lists about 80 minutes at 60°F, up to 40 minutes at 75°F, 21 minutes 45 seconds at 90°F and 13 minutes at 105°F for the Xtra.

How long do I have to work with this product?

Evercoat states: The data sheet gives a working time of up to 40 minutes at 75°F. Conditions: At 75°F. About 80 minutes at 60°F and 13 minutes at 105°F for the Xtra.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Body filler hardens faster in warm rooms and with more hardener. Follow the current data sheet. Follow the product label for your conditions.