Sikafloor-94
Epoxy primer and self-leveling coating, Thai edition · INTL · manufacturer-sourced
How long before you can recoat Sikafloor-94?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Epoxy primer and self-leveling coating, Thai edition to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 68°F
- Working time ends20 minutes
- Ready for another coat8 hours
Worth noticing: Working time is only 20 minutes; the next stated stage, ready for another coat, is 8 hours.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Working time ends20 minutes
- Ready for another coat8 hours
From Sika data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: usa.sika.com
Conditions & fine print
- Stated conditions: 68°F (20°C)
- Pot life, recoat and traffic times depend on temperature and film thickness. Follow the current data sheet.
- Region INTL. Formulas can differ between countries; check your container.
- Working time ends: 30 minutes at 10°C.
- Ready for another coat: 15 hours at 10°C. The sheet says waiting times are approximately halved with Sikafloor Booster.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Sika Sikafloor-94
- Variant
- Epoxy primer and self-leveling coating, Thai edition
- Region
- INTL
- Listed use
- epoxy coating, floor primer, concrete floors
- Timed stages recorded
- tooling, recoat min
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Version 01.01, February 2020 (Thailand)
Condition attached to the stated time: 30 minutes at 10°C.
About this product
A short Thai data sheet with two temperature columns: 10 and 20°C. Pot life is 30 and 20 minutes, waiting time 15 and 8 hours, and the sheet says waiting times are approximately halved with Sikafloor Booster.
Using this specific product
Sika Sikafloor-94 is listed here as the Epoxy primer and self-leveling coating, Thai edition version for epoxy coating, floor primer, and concrete floors. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Epoxy primer and self-leveling coating, Thai edition; related versions can use different timing.
- For epoxy coating, floor primer, and concrete floors, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- 30 minutes at 10°C. 15 hours at 10°C. The sheet says waiting times are approximately halved with Sikafloor Booster.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The data sheet gives a pot life of 20 minutes at 20°C. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with ArmorPoly 80Recoat: 2 h there, 8 h here.
- Compare with Bona ClassicSealRecoat: 2–3 h there, 8 h here.
Questions
How long before you can recoat this product?
Sika states: The data sheet gives a pot life of 20 minutes at 20°C. Conditions: 30 minutes at 10°C.. The data sheet gives a waiting time before overcoating of 8 hours at 20°C. Conditions: 15 hours at 10°C. The sheet says waiting times are approximately halved with Sikafloor Booster.. These are the manufacturer’s stated times, not a guarantee.
What does Sikafloor Booster do to Sikafloor-94's waiting time?
The data sheet says waiting times are approximately halved with the addition of Sikafloor Booster. The unboosted figures are 15 hours at 10°C and 8 hours at 20°C.
How long do I have to work with this product?
Sika states: The data sheet gives a pot life of 20 minutes at 20°C. Conditions: 30 minutes at 10°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Pot life, recoat and traffic times depend on temperature and film thickness. Follow the current data sheet. Follow the product label for your conditions.