722 The Pro Carpet and Flooring Adhesive
Carpet and resilient flooring adhesive · US · manufacturer-sourced
How long before you can drive on TEC (H.B. Fuller) 722 The Pro Carpet and Flooring Adhesive?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Carpet and resilient flooring adhesive to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 73°F
- Working time ends20–40 minutes
- Heavy traffic1–2 days
Worth noticing: Working time is only 20–40 minutes; the next stated stage, heavy traffic, is 1–2 days.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Working time ends20–40 minutes
- Heavy traffic1–2 days
From TEC (H.B. Fuller) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: tecspecialty.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Floor coating times assume the stated temperature and humidity. Cold slabs, thick coats and damp concrete lengthen them. Follow the current data sheet.
- Apply at 50°F or above
- Region US. Formulas can differ between countries; check your container.
- Working time ends: The source gives no conditions for this time.
- Heavy traffic: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- TEC (H.B. Fuller) 722 The Pro Carpet and Flooring Adhesive
- Variant
- Carpet and resilient flooring adhesive
- Region
- US
- Listed use
- carpet, resilient flooring
- Timed stages recorded
- tooling, heavy traffic
- Source checked
- 2026-10-25
Documentation: Technical data sheet · DS722 R0925-20, updated September 2025
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A carpet and flooring adhesive with a short 20 to 40 minute open time and a 24 to 48 hour wait before heavy traffic. The room has to be kept at 60°F or higher for 24 hours before, during and after installation, and the adhesive should not be used below 50°F.
Using this specific product
TEC (H.B. Fuller) 722 The Pro Carpet and Flooring Adhesive is listed here as the Carpet and resilient flooring adhesive version for carpet and resilient flooring. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Carpet and resilient flooring adhesive; related versions can use different timing.
- For carpet and resilient flooring, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- The source gives no conditions for this time.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The data sheet gives a working time and open time of 20 to 40 minutes. Open the area gradually and keep heavy or hot tires off until the full stated milestone.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Questions
How long before you can drive on this product?
TEC (H.B. Fuller) states: The data sheet gives a working time and open time of 20 to 40 minutes. Conditions: The source gives no conditions for this time.. The data sheet says to avoid heavy traffic for 24 to 48 hours after installation. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How warm must the room be for TEC The Pro 722?
The sheet says at least 60°F for 24 hours before, during and after installation, and not to use it below 50°F.
How long do I have to work with this product?
TEC (H.B. Fuller) states: The data sheet gives a working time and open time of 20 to 40 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor coating times assume the stated temperature and humidity. Cold slabs, thick coats and damp concrete lengthen them. Follow the current data sheet. Follow the product label for your conditions.