QUIKRETE

Advanced Polymer Non-Sag Sealant

Gray / tan · US · not yet reviewed

Short answer

Paint-ready: 2 hours after application.
Immersion-ready: 7 days after application.

Start the clock

When did you apply it?
Outdoors, temperature
Where?
Thickness

Stated times

  • Tack-free1 hour
  • Paint-ready2 hours
  • Light foot traffic3 days
  • Full cure3–7 days
  • Immersion-ready7 days

From QUIKRETE data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Do not apply if rain is expected before the sealant has partially cured. Low humidity, cooler temperatures and non-porous surfaces lengthen these times.
  • Temperature range: 40°F to 95°F
  • Region US. Formulas can differ between countries; check your container.
  • Tack-free: 77°F and 50% RH
  • Paint-ready: Water-based latex paint
  • Immersion-ready: Temporary immersion
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Questions

How long before you can paint Advanced Polymer Non-Sag Sealant?

QUIKRETE states: Cure for a minimum of 2 hours before painting with water-based latex paint. Conditions: Water-based latex paint. This is the manufacturer’s stated time, not a guarantee.

How long before Advanced Polymer Non-Sag Sealant is immersion-ready?

QUIKRETE states: Allow 7 days to cure for temporary water immersion applications. Conditions: Temporary immersion. This is the manufacturer’s stated time, not a guarantee.

Similar products

All caulks and sealants