QUIKRETE 5000 High Early Strength Concrete Mix (No. 1007)
80 lb · US · not yet reviewed
How long before you can walk on QUIKRETE QUIKRETE 5000 High Early Strength Concrete Mix (No. 1007)?
Short answer
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Calculate return-to-use time
Your countdown
Stated times
- Light foot traffic10–12 hours
- Curing period complete7 days*
* Shorter only under the manufacturer’s stated conditions.
From QUIKRETE data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: quikrete.com
Conditions & fine print
- Stated conditions: Curing period depends on temperature
- Protect from freezing for the first 48 hours. The data sheet gives no vehicle traffic time. Don't apply curing compound if rain or temperatures below 50°F are expected within 24 hours.
- Region US. Formulas can differ between countries; check your container.
- Curing period complete: 5 days at 70°F or warmer; 7 days at 50–70°F
- Entered from the manufacturer source; second review pending. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Using this specific product
QUIKRETE QUIKRETE 5000 High Early Strength Concrete Mix (No. 1007) is listed here as the 80 lb version for slab, sidewalk, and steps. For repairing concrete or masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says 80 lb; related versions can use different timing.
- For slab, sidewalk, and steps, pay particular attention to substrate moisture, depth, temperature and protection from traffic.
- 5 days at 70°F or warmer; 7 days at 50–70°F.
How to check readiness
Check the slowest, coolest section before loading or coating. Try a protected edge first and avoid turning, dragging or concentrated loads. Continue curing 5 days in warm weather (70°F or higher) or 7 days in colder weather (50–70°F).
Avoid this mistake
Early strength, coating readiness and full cure are separate decisions.
Questions
How long does this product take to dry?
QUIKRETE states: It has a walk-on time of 10 to 12 hours. Continue curing 5 days in warm weather (70°F or higher) or 7 days in colder weather (50–70°F). Conditions: 5 days at 70°F or warmer; 7 days at 50–70°F. These are the manufacturer’s stated times, not a guarantee.
How long until I can walk or drive on this product?
QUIKRETE states: It has a walk-on time of 10 to 12 hours. These are the manufacturer’s stated times, not a guarantee.
How long does this product take to fully cure?
QUIKRETE states: Continue curing 5 days in warm weather (70°F or higher) or 7 days in colder weather (50–70°F). Conditions: 5 days at 70°F or warmer; 7 days at 50–70°F. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Protect from freezing for the first 48 hours. The data sheet gives no vehicle traffic time. Don't apply curing compound if rain or temperatures below 50°F are expected within 24 hours. Follow the product label for your conditions.