Concrete Bonding Adhesive
1 qt / 1 gal / 5 gal (Nos. 9901, 9902) · US · not yet reviewed
How long does QUIKRETE Concrete Bonding Adhesive take to dry?
Short answer
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Calculate return-to-use time
Your countdown
Stated times
- Fully dry2–3 hours
From QUIKRETE data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: quikrete.com
Conditions & fine print
- Stated conditions: Varies with temperature, humidity and the condition of the concrete
- Paint-on: place new concrete or patch as soon as the adhesive is dry. Slurry coat: apply the repair material before the slurry dries. As a primer for self-leveling resurfacers, the topping can be applied up to 48 hours later if the area stays clean and dry. Do not apply below 50°F.
- Temperature range: 50°F to —°F
- Region US. Formulas can differ between countries; check your container.
- Fully dry: Varies greatly with temperature, humidity and the condition of the concrete
- Entered from the manufacturer source; second review pending. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Using this specific product
QUIKRETE Concrete Bonding Adhesive is listed here as the 1 qt / 1 gal / 5 gal (Nos. 9901, 9902) version for concrete repair, topping, and patching. For repairing concrete or masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says 1 qt / 1 gal / 5 gal (Nos. 9901, 9902); related versions can use different timing.
- For concrete repair, topping, and patching, pay particular attention to substrate moisture, depth, temperature and protection from traffic.
- Varies greatly with temperature, humidity and the condition of the concrete.
How to check readiness
Check the slowest, coolest section before loading or coating. When used as a primer, a drying time of 2 to 3 hours is typical.
Avoid this mistake
Early strength, coating readiness and full cure are separate decisions.
Questions
How long does this product take to dry?
QUIKRETE states: When used as a primer, a drying time of 2 to 3 hours is typical. Conditions: Varies greatly with temperature, humidity and the condition of the concrete. These are the manufacturer’s stated times, not a guarantee.
How long does this product take to fully cure?
QUIKRETE states: When used as a primer, a drying time of 2 to 3 hours is typical. Conditions: Varies greatly with temperature, humidity and the condition of the concrete. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Paint-on: place new concrete or patch as soon as the adhesive is dry. Slurry coat: apply the repair material before the slurry dries. As a primer for self-leveling resurfacers, the topping can be applied up to 48 hours later if the area stays clean and dry. Do not apply below 50°F. Application temperature: 50°F to —°F. Follow the product label for your conditions.