QUIKRETE

Mortar Mix (1102)

Type N masonry mortar · US · manufacturer-sourced

Check your container: This countdown is for the Type N masonry mortar variant. Similar-looking versions may have different times.

How long should QUIKRETE Mortar Mix (1102) be left to cure?

Short answer

Curing period complete: 2 days after application.
Concrete & repair

Placement-to-service plan

Set, hardening and loading come days apart

  1. Place and finish the Type N masonry mortar
  2. Keep it moist or protected as directed
  3. Load it only at the stated strength time

This product’s stated stages

  • Working time ends45 minutes
  • Curing period2 days

Worth noticing: Working time is only 45 minutes; the next stated stage, curing period, is 2 days.

Common mistake: Driving on it because it feels hard; strength keeps building for days.

Concrete & repair

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Time the concrete cure

When was the concrete placed?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends45 minutes
  • Curing period complete2 days

From QUIKRETE data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: quikrete.com

Conditions & fine print
  • Stated conditions: Not stated in the data sheet
  • Set and cure times shorten in heat and lengthen in cold. Follow the current data sheet for mixing water, thickness limits and curing for your job. The data sheet gives 30 to 45 minutes of rest for tuck pointing mix, says to protect mortar from freezing for the first 48 hours, and says curing is only required in very hot, dry or windy conditions.
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: The source gives no conditions for this time.
  • Curing period complete: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
QUIKRETE Mortar Mix (1102)
Variant
Type N masonry mortar
Region
US
Listed use
mortar, brick, block, repointing
Timed stages recorded
tooling, cure period
Source checked
2026-10-25

Documentation: Technical data sheet · Data sheet; no revision date

Condition attached to the stated time: The source gives no conditions for this time.

About this product

Mortar Mix (1102) is a concrete & repair product from QUIKRETE, listed for mortar, brick, block. Its times are stated under: The source gives no conditions for this time. Its curing period time of 2 days is shorter than 67% of the 9 concrete & repair products here that list one.

Using this specific product

QUIKRETE Mortar Mix (1102) is listed here as the Type N masonry mortar version for mortar, brick, and block. For repairing concrete or masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Type N masonry mortar; related versions can use different timing.
  • For mortar, brick, and block, pay particular attention to substrate moisture, depth, temperature and protection from traffic.
  • The source gives no conditions for this time.

How to check readiness

Check the slowest, coolest section before loading or coating. The data sheet says to mix an amount you can use in about 45 minutes. The data sheet says to protect the mortar from freezing during the first 48 hours.

Avoid this mistake

Early strength, coating readiness and full cure are separate decisions.

Keep going

Questions

How long should this product be left to cure?

QUIKRETE states: The data sheet says to mix an amount you can use in about 45 minutes. Conditions: The source gives no conditions for this time.. The data sheet says to protect the mortar from freezing during the first 48 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

How does Mortar Mix (1102) compare with other concrete & repair products?

QUIKRETE states 2 days for curing period, which is quicker than the typical concrete & repair product here (median 3 days across 9 products). The quickest listed is QUIKRETE FastSet Repair Mortar at 1 day; the slowest is QUIKRETE Sand/Topping Mix (No. 1103) at 7 days.

Is there a faster QUIKRETE concrete & repair option?

Yes. Among the 8 QUIKRETE concrete & repair products listed here, QUIKRETE FastSet Repair Mortar states a shorter curing period time (1 day versus 2 days).

What conditions do the stated times for Mortar Mix (1102) assume?

Stated conditions: The source gives no conditions for this time. Cooler, damper or thicker applications usually take longer.

How long do I have to work with this product?

QUIKRETE states: The data sheet says to mix an amount you can use in about 45 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Set and cure times shorten in heat and lengthen in cold. Follow the current data sheet for mixing water, thickness limits and curing for your job. The data sheet gives 30 to 45 minutes of rest for tuck pointing mix, says to protect mortar from freezing for the first 48 hours, and says curing is only required in very hot, dry or windy conditions. Follow the product label for your conditions.

Similar products

All concrete and repair products