Nippon Paint

Metallic Paint

Thermoplastic-acrylic metallic paint (Malaysia) · INTL · manufacturer-sourced

Check your container: This countdown is for the Thermoplastic-acrylic metallic paint (Malaysia) variant. Similar-looking versions may have different times.

How long before you can recoat Nippon Paint Metallic Paint?

Short answer

Ready for another coat: 2 hours after application.
Safe to touch: 15 minutes after application.
Gun and metal finishes

Metal-finish schedule

Handling, recoat and full hardness arrive at different times

  1. Degrease and apply the Thermoplastic-acrylic metallic paint (Malaysia)
  2. Recoat on the stated schedule
  3. Wait for full hardness before assembly or use

This product’s stated stages Quoted at 86°F

  • Safe to touch15 minutes
  • Fully dry45 minutes
  • Ready for another coat2 hours

Worth noticing: Safe to touch at 15 minutes; ready for another coat at 2 hours.

Common mistake: Handling a fresh coat on bare metal and leaving prints that cure into the film.

Time the next metal coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch15 minutes
  • Ready for another coat2 hours
  • Fully dry45 minutes

From Nippon Paint data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: nipponpaint.com.my

Conditions & fine print
  • Stated conditions: 86°F (30°C)
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Region INTL. Formulas can differ between countries; check your container.
  • Safe to touch: At 28 to 32°C and 70 to 80% humidity, with 5% thinner.
  • Ready for another coat: At 28 to 32°C and 70 to 80% humidity, with 5% thinner.
  • Fully dry: At 28 to 32°C and 70 to 80% humidity, with 5% thinner.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Nippon Paint Metallic Paint
Variant
Thermoplastic-acrylic metallic paint (Malaysia)
Region
INTL
Listed use
decorative metal, gates, ornaments
Timed stages recorded
touch, recoat min, full dry
Source checked
2026-10-25

Documentation: Technical data sheet · Data sheet

Condition attached to the stated time: At 28 to 32°C and 70 to 80% humidity, with 5% thinner.

About this product

A fast metallic paint: touch dry in 15 minutes, hard dry in 45 and recoated in 2 hours, quicker than Nippon's aluminium paint on the same hot-day basis.

Using this specific product

Nippon Paint Metallic Paint is listed here as the Thermoplastic-acrylic metallic paint (Malaysia) version for decorative metal, gates, and ornaments. For finishing metal parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Thermoplastic-acrylic metallic paint (Malaysia); related versions can use different timing.
  • For decorative metal, gates, and ornaments, pay particular attention to degreasing, blasting, film thickness and oven accuracy.
  • At 28 to 32°C and 70 to 80% humidity, with 5% thinner.

How to check readiness

Follow the cure schedule and the substrate-specific temperature. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The sheet gives hard dry in 45 minutes.

Avoid this mistake

Air-dry is not full cure; heavy-duty cleaning waits for the stated cure.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Nippon Paint states: The sheet gives touch dry in 15 minutes. Conditions: At 28 to 32°C and 70 to 80% humidity, with 5% thinner.. The sheet gives recoating at 2 hours. Conditions: At 28 to 32°C and 70 to 80% humidity, with 5% thinner.. The sheet gives hard dry in 45 minutes. Conditions: At 28 to 32°C and 70 to 80% humidity, with 5% thinner.. These are the manufacturer’s stated times, not a guarantee.

How long between coats of Nippon Metallic Paint?

The sheet gives 2 hours at 28 to 32°C and 70 to 80% humidity.

How long until this product is safe to touch?

Nippon Paint states: The sheet gives touch dry in 15 minutes. Conditions: At 28 to 32°C and 70 to 80% humidity, with 5% thinner.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is fully dry?

Nippon Paint states: The sheet gives hard dry in 45 minutes. Conditions: At 28 to 32°C and 70 to 80% humidity, with 5% thinner.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All gun and metal finishes