Nippon Paint

12-01 Universal Epoxy Primer

Two-pack epoxy primer (Vietnam sheet) · INTL · manufacturer-sourced

Check your container: This countdown is for the Two-pack epoxy primer (Vietnam sheet) variant. Similar-looking versions may have different times.

How long before you can recoat Nippon Paint 12-01 Universal Epoxy Primer?

Short answer

Ready for another coat: 4 hours after application.
Safe to touch: 2 hours after application.
Industrial protective coatings

Film-build schedule

Recoat has a floor and a ceiling, and film thickness moves both

  1. Prepare the surface and apply the Two-pack epoxy primer (Vietnam sheet) to the stated thickness
  2. Recoat inside the window the data sheet gives
  3. Return to service only at the stated cure

This product’s stated stages Quoted at 68°F

  • Safe to touch2 hours
  • Ready for another coat4 hours
  • Fully dry16 hours
  • Full cure7 days
  • Recoat window closes30 days

Worth noticing: Recoat inside the window: not before 4 hours and not after 30 days.

Common mistake: Recoating after the maximum window has closed; the next coat may not bond without abrading.

Check the recoat window

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch2 hours
  • Recoat window closes30 days
  • Ready for another coat4 hours
  • Fully dry16 hours
  • Full cure7 days

From Nippon Paint data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: nipponpaint.com.my

Conditions & fine print
  • Stated conditions: 68°F (20°C)
  • Protective-coating times are for the stated film thickness, temperature and humidity. Cold steel, thick films and poor airflow lengthen them. Follow the current data sheet.
  • Apply at 50°F or above
  • Region INTL. Formulas can differ between countries; check your container.
  • Safe to touch: At 20°C substrate. It is 1 hour at 30°C.
  • Recoat window closes: At 20°C. Atmospheric service has no fixed limit.
  • Ready for another coat: At 20°C substrate. It is 3 hours at 30°C.
  • Fully dry: At 20°C substrate. It is 10 hours at 30°C.
  • Full cure: At 20°C. It is 5 days at 30°C.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Nippon Paint 12-01 Universal Epoxy Primer
Variant
Two-pack epoxy primer (Vietnam sheet)
Region
INTL
Listed use
steel primer, immersion, atmospheric
Timed stages recorded
touch, recoat max, recoat min, full dry, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Specification sheet (2025-06)

Condition attached to the stated time: At 20°C substrate. It is 1 hour at 30°C.

About this product

A 4:1 epoxy primer that waits 15 minutes after mixing. The sheet separates its maximum recoat by service: 30 days for immersion, no fixed limit in air.

Using this specific product

Nippon Paint 12-01 Universal Epoxy Primer is listed here as the Two-pack epoxy primer (Vietnam sheet) version for steel primer, immersion, and atmospheric. For coating steel or industrial surfaces, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Two-pack epoxy primer (Vietnam sheet); related versions can use different timing.
  • For steel primer, immersion, and atmospheric, pay particular attention to surface preparation, film thickness, temperature, dew point and pot life.
  • At 20°C substrate. It is 1 hour at 30°C. At 20°C. Atmospheric service has no fixed limit. At 20°C substrate. It is 3 hours at 30°C. At 20°C substrate. It is 10 hours at 30°C. At 20°C. It is 5 days at 30°C.

How to check readiness

Check dry film thickness and the recoat window before the next coat. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. The sheet gives a maximum of 30 days for immersion service. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoat windows can close; past the maximum, abrading is usually required.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Nippon Paint states: The sheet gives surface dry in 2 hours. Conditions: At 20°C substrate. It is 1 hour at 30°C.. The sheet gives a maximum of 30 days for immersion service. Conditions: At 20°C. Atmospheric service has no fixed limit.. The sheet gives a minimum recoat of 4 hours. Conditions: At 20°C substrate. It is 3 hours at 30°C.. The sheet gives through dry in 16 hours. Conditions: At 20°C substrate. It is 10 hours at 30°C.. The sheet gives full cure in 7 days. Conditions: At 20°C. It is 5 days at 30°C.. These are the manufacturer’s stated times, not a guarantee.

What is the maximum recoat interval for Nippon 12-01 in immersion?

The sheet gives 30 days at 20°C.

How long does this product take to fully cure?

Nippon Paint states: The sheet gives full cure in 7 days. Conditions: At 20°C. It is 5 days at 30°C.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Nippon Paint states: The sheet gives surface dry in 2 hours. Conditions: At 20°C substrate. It is 1 hour at 30°C.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is fully dry?

Nippon Paint states: The sheet gives through dry in 16 hours. Conditions: At 20°C substrate. It is 10 hours at 30°C.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Protective-coating times are for the stated film thickness, temperature and humidity. Cold steel, thick films and poor airflow lengthen them. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All industrial protective coatings