Planolit
Smoothing underlayment (India page) · INTL · manufacturer-sourced
How long before you can install flooring over MAPEI Planolit?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Smoothing underlayment (India page) to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 73°F
- Working time ends15–20 minutes
- Set1 hour
- Light foot traffic4 hours
- Ready for flooring1 day
Worth noticing: Working time is only 15–20 minutes; the next stated stage, set, is 1 hour.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Working time ends15–20 minutes
- Set / hardened1 hour
- Ready for floor covering1 day
- Light foot traffic4 hours
From MAPEI product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: mapei.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
- Region INTL. Formulas can differ between countries; check your container.
- Working time ends: The source gives no conditions for this time.
- Set / hardened: The source gives no conditions for this time.
- Ready for floor covering: The source gives no conditions for this time.
- Light foot traffic: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- MAPEI Planolit
- Variant
- Smoothing underlayment (India page)
- Region
- INTL
- Listed use
- levelling, floor smoothing
- Timed stages recorded
- tooling, set, floor ready, light foot
- Source checked
- 2026-10-25
Documentation: Official product page · Product page, accessed 2026-10-26
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A smoothing compound with a short pot life, 15 to 20 minutes, set in about an hour, light foot traffic at 4 hours and floor coverings after 24 hours.
Using this specific product
MAPEI Planolit is listed here as the Smoothing underlayment (India page) version for levelling and floor smoothing. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Smoothing underlayment (India page); related versions can use different timing.
- For levelling and floor smoothing, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- The source gives no conditions for this time.
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The page gives a pot life of 15 to 20 minutes. The page gives setting in about 60 minutes. The page gives a wait of 24 hours before installing floor coverings.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with Rapid Set (CTS Cement) CONCRETE LEVELERSet: 2 h there, 1 h here.
- Compare with Rapid Set (CTS Cement) FLOOR PATCHSet: 30–50 min there, 1 h here.
Questions
How long before you can install flooring over this product?
MAPEI states: The page gives a pot life of 15 to 20 minutes. Conditions: The source gives no conditions for this time.. The page gives setting in about 60 minutes. Conditions: The source gives no conditions for this time.. The page gives a wait of 24 hours before installing floor coverings. Conditions: The source gives no conditions for this time.. The page gives light foot traffic after 4 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How soon can I lay flooring on Planolit?
The page gives 24 hours before installing floor coverings.
How long do I have to work with this product?
MAPEI states: The page gives a pot life of 15 to 20 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long before I can walk on tile set with this product?
MAPEI states: The page gives light foot traffic after 4 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long until this product is set or hard?
MAPEI states: The page gives setting in about 60 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.