Loctite (Henkel)

FREKOTE WOLO

Wipe-on, leave-on mold release · US · manufacturer-sourced

Check your container: This countdown is for the Wipe-on, leave-on mold release variant. Similar-looking versions may have different times.

How long before you can recoat Loctite (Henkel) FREKOTE WOLO?

Short answer

Ready for another coat: 5 minutes after application.
Full cure: 15 minutes after application.
Mold release agents

Release-and-cast plan

Let the release dry before the pour

  1. Apply the Wipe-on, leave-on mold release in thin coats
  2. Let it flash or dry as stated
  3. Pour or mold after the stated wait

This product’s stated stages Quoted at 68°F

  • Ready for another coat5 minutes
  • Full cure15 minutes
  • Curing period2–3 weeks

Worth noticing: You can recoat at 5 minutes, but the film is not fully cured until 15 minutes.

Common mistake: Pouring onto a release film that is still wet; surface defects result.

Mold release agents

Project stage ladder

Demolding, handling, finishing and final use may occur at different times

ShapeSetFinishUse

For molds, composites, and tooling, identify which stage the stated 5 minutes milestone actually unlocks. Earlier handling does not prove final cure.

Time the release

When did you apply the release?
Conditions that affect drying
Where?
Thickness

Stated times

  • Ready for another coat5 minutes
  • Curing period complete14–21 days
  • Full cure15 minutes

From Loctite (Henkel) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: loctiteproducts.com

Conditions & fine print
  • Stated conditions: 68°F (20°C)
  • Release agents work best on a clean, conditioned mold. Follow the current data sheet and your mold maker's instructions.
  • Temperature range: 55°F to 106°F
  • Region US. Formulas can differ between countries; check your container.
  • Ready for another coat: Wipe each coat lightly for 10 to 30 seconds.
  • Curing period complete: At 22°C.
  • Full cure: At 20°C.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Loctite (Henkel) FREKOTE WOLO
Variant
Wipe-on, leave-on mold release
Region
US
Listed use
molds, composites, tooling
Timed stages recorded
recoat min, cure period, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · TDS January 2015

Condition attached to the stated time: Wipe each coat lightly for 10 to 30 seconds.

About this product

A wipe-on release for molds that are not wiped off afterward, the name stands for wipe on, leave on. Coats are 5 minutes apart and the final coat cures for 15 minutes, but a brand-new or repaired mold needs 2 to 3 weeks before real production.

Using this specific product

Loctite (Henkel) FREKOTE WOLO is listed here as the Wipe-on, leave-on mold release version for molds, composites, and tooling. For conditioning a mold, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Wipe-on, leave-on mold release; related versions can use different timing.
  • For molds, composites, and tooling, pay particular attention to mold material, coat count, cure between coats and mold temperature.
  • Wipe each coat lightly for 10 to 30 seconds. At 22°C. At 20°C.

How to check readiness

Follow the coat-by-coat schedule and the cure time before molding. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The data sheet says a new or repaired mold usually needs a minimum of 2 to 3 weeks before full-scale production. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

A new or repaired mold may need a long conditioning period before production.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Loctite (Henkel) states: The data sheet says to allow a minimum of 5 minutes before applying the next coat. Conditions: Wipe each coat lightly for 10 to 30 seconds.. The data sheet says a new or repaired mold usually needs a minimum of 2 to 3 weeks before full-scale production. Conditions: At 22°C.. The data sheet says to allow the final coat to cure for 15 minutes. Conditions: At 20°C.. These are the manufacturer’s stated times, not a guarantee.

How long should a new mold wait before using Frekote WOLO in production?

The data sheet says new or repaired molds usually need a minimum of 2 to 3 weeks at 22°C before starting full-scale production.

How long does this product take to fully cure?

Loctite (Henkel) states: The data sheet says to allow the final coat to cure for 15 minutes. Conditions: At 20°C.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Release agents work best on a clean, conditioned mold. Follow the current data sheet and your mold maker's instructions. Follow the product label for your conditions.

Similar products

All mold release agents