Little Greene

Intelligent Matt Emulsion

Washable matt emulsion (UK) · GB · manufacturer-sourced

Check your container: This countdown is for the Washable matt emulsion (UK) variant. Similar-looking versions may have different times.

How long before you can recoat Little Greene Intelligent Matt Emulsion?

Short answer

Ready for another coat: 1–2 hours after application.
Safe to touch: 30 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Washable matt emulsion (UK) in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 73°F

  • Safe to touch30 minutes
  • Ready for another coat1–2 hours
  • Full cure3–7 days

Worth noticing: Touch-dry comes at 30 minutes, but full cure is 3–7 days, about 144 times longer.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Ready for another coat1–2 hours
  • Full cure3–7 days

From Little Greene data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: None

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label.
  • Apply at 46°F or above
  • Region GB. Formulas can differ between countries; check your container.
  • Safe to touch: The source gives no conditions for this time.
  • Ready for another coat: The source gives no conditions for this time.
  • Full cure: Depends on film thickness and ambient conditions.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Little Greene Intelligent Matt Emulsion
Variant
Washable matt emulsion (UK)
Region
GB
Listed use
walls, ceilings, family rooms
Timed stages recorded
touch, recoat min, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Data sheet

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A washable matt that recoats in 1 to 2 hours, quicker than the satin. The final sheen can take up to seven days to appear.

Using this specific product

Little Greene Intelligent Matt Emulsion is listed here as the Washable matt emulsion (UK) version for walls, ceilings, and family rooms. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Washable matt emulsion (UK); related versions can use different timing.
  • For walls, ceilings, and family rooms, pay particular attention to surface preparation, coat thickness and ventilation.
  • The source gives no conditions for this time. Depends on film thickness and ambient conditions.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Little Greene states: The sheet gives touch dry in 30 minutes. Conditions: The source gives no conditions for this time.. The sheet gives a minimum recoat of 1 to 2 hours. Conditions: The source gives no conditions for this time.. The sheet gives full cure in 3 to 7 days. Conditions: Depends on film thickness and ambient conditions.. These are the manufacturer’s stated times, not a guarantee.

How long between coats of Intelligent Matt Emulsion?

The sheet gives a minimum of 1 to 2 hours.

How long does this product take to fully cure?

Little Greene states: The sheet gives full cure in 3 to 7 days. Conditions: Depends on film thickness and ambient conditions.. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch?

Little Greene states: The sheet gives touch dry in 30 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Paint times are for the stated temperature and humidity. Cold, damp rooms and thick films lengthen them. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching