Stuccoat Concentrate DS1027
Cement additive concentrate · US · manufacturer-sourced
How long should Dryvit Stuccoat Concentrate DS1027 be left to cure?
Short answer
Masonry treatment plan
Rain-ready, dry and fully cured are different checkpoints
- Clean and dry the surface
- Apply the Cement additive concentrate
- Keep it dry through the stated rain-free period
This product’s stated stages Quoted at 73°F
- Curing period2 days
Worth noticing: The manufacturer states only one timing here (curing period, 2 days); nothing else is inferred.
Common mistake: Treating a damp wall; the moisture traps and the product will not cure properly.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time the masonry treatment
Your countdown
Stated times
- Curing period complete2 days
From Dryvit data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: dryvit.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
- Temperature range: 41°F to 100°F
- Region US. Formulas can differ between countries; check your container.
- Curing period complete: Do not apply at or below 40°F or above 100°F.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Dryvit Stuccoat Concentrate DS1027
- Variant
- Cement additive concentrate
- Region
- US
- Listed use
- stucco mixes, cement coat
- Timed stages recorded
- cure period
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Data sheet DS1027 (undated)
Condition attached to the stated time: Do not apply at or below 40°F or above 100°F.
About this product
A concentrate rather than a ready finish, so its one time is a curing rule: keep it moist for at least 48 hours.
Using this specific product
Dryvit Stuccoat Concentrate DS1027 is listed here as the Cement additive concentrate version for stucco mixes and cement coat. For cleaning or sealing masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Cement additive concentrate; related versions can use different timing.
- For stucco mixes and cement coat, pay particular attention to surface porosity, temperature, moisture in the substrate and rain forecast.
- Do not apply at or below 40°F or above 100°F.
How to check readiness
Test a small area and watch for the stated rain-free and cure times. The sheet gives a minimum of 48 hours of moist curing.
Avoid this mistake
A dry-looking surface can still be taking up a sealer or repellent.
Questions
How long should this product be left to cure?
Dryvit states: The sheet gives a minimum of 48 hours of moist curing. Conditions: Do not apply at or below 40°F or above 100°F.. These are the manufacturer’s stated times, not a guarantee.
How long does Stuccoat Concentrate need moist curing?
The sheet gives a minimum of 48 hours.
What affects how long this product takes to dry or cure?
Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.
Similar products
- PROSOCO Sure Klean 600 DetergentMasonry cleaner · Masonry cleaners, sealers and water repellents · USReady to rinse 3–5 minutes
- PROSOCO Sure Klean Heavy Duty Concrete CleanerConcentrated concrete cleaner · Masonry cleaners, sealers and water repellents · USReady to rinse 2–3 minutes
- SAKRETE Concrete & Mortar DissolverAcidic dissolver · Masonry cleaners, sealers and water repellents · CanadaReady to rinse 10–15 minutes