Fire Cement
Heat-resistant cement (UK, TDS01649) · GB · manufacturer-sourced
How long does Bostik Fire Cement take to dry?
Short answer
All stated times for Fire Cement
| Milestone | Time | Condition |
|---|---|---|
| Fully dry | 1 day | The source gives no conditions for this time. |
| Curing period complete | 4 hours | The source gives no conditions for this time. |
Source: Technical data sheet TDS01649, 11/01/2024.
Masonry treatment plan
Rain-ready, dry and fully cured are different checkpoints
- Clean and dry the surface
- Apply the Heat-resistant cement (UK, TDS01649)
- Keep it dry through the stated rain-free period
This product’s stated stages Quoted at 73°F
- Curing period4 hours
- Fully dry1 day
Worth noticing: Curing period at 4 hours; fully dry at 1 day.
Common mistake: Treating a damp wall; the moisture traps and the product will not cure properly.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time the masonry treatment
Your countdown
Stated times
- Fully dry1 day
- Curing period complete4 hours
From Bostik data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: bostik.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
- Region GB. Formulas can differ between countries; check your container.
- Fully dry: The source gives no conditions for this time.
- Curing period complete: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Bostik Fire Cement
- Variant
- Heat-resistant cement (UK, TDS01649)
- Region
- GB
- Listed use
- fireplace repair, stove joints
- Timed stages recorded
- full dry, cure period
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet TDS01649, 11/01/2024
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A fire cement that needs 24 hours to dry and then a gentle first heat to 100°C over 4 hours.
Using this specific product
Bostik Fire Cement is listed here as the Heat-resistant cement (UK, TDS01649) version for fireplace repair and stove joints. For cleaning or sealing masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Heat-resistant cement (UK, TDS01649); related versions can use different timing.
- For fireplace repair and stove joints, pay particular attention to surface porosity, temperature, moisture in the substrate and rain forecast.
- The source gives no conditions for this time.
How to check readiness
Test a small area and watch for the stated rain-free and cure times. The sheet gives drying in 24 hours. The sheet gives the initial heat to 100°C over 4 hours.
Avoid this mistake
A dry-looking surface can still be taking up a sealer or repellent.
Compare with similar products
- Compare with Dryvit HDP Finishes DS811Fully dry: 1 day there, 1 day here.
- Compare with Parex USA DPR Acrylic FinishFully dry: 1 day there, 1 day here.
Questions
How long does this product take to dry?
Bostik states: The sheet gives drying in 24 hours. Conditions: The source gives no conditions for this time.. The sheet gives the initial heat to 100°C over 4 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How hot should the first fire be after Bostik Fire Cement?
The sheet gives an initial heat to 100°C over 4 hours.
What affects how long this product takes to dry or cure?
Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.
Similar products
- PROSOCO Sure Klean 600 DetergentMasonry cleaner · Masonry cleaners, sealers and water repellents · USReady to rinse 3–5 minutes
- PROSOCO Sure Klean Heavy Duty Concrete CleanerConcentrated concrete cleaner · Masonry cleaners, sealers and water repellents · USReady to rinse 2–3 minutes
- SAKRETE Concrete & Mortar DissolverAcidic dissolver · Masonry cleaners, sealers and water repellents · CanadaReady to rinse 10–15 minutes