Exterior Masonry
Matt masonry paint (UK) · GB · manufacturer-sourced
How long before you can recoat Farrow & Ball Exterior Masonry?
Short answer
Masonry treatment plan
Rain-ready, dry and fully cured are different checkpoints
- Clean and dry the surface
- Apply the Matt masonry paint (UK)
- Keep it dry through the stated rain-free period
This product’s stated stages Quoted at 73°F
- Fully dry2 hours
- Ready for another coat5 hours
- Curing period2 weeks
Worth noticing: Fully dry at 2 hours; curing period at 2 weeks.
Common mistake: Treating a damp wall; the moisture traps and the product will not cure properly.
Time the masonry treatment
Your countdown
Stated times
- Ready for another coat5 hours
- Fully dry2 hours
- Curing period complete14 days
From Farrow & Ball data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: None
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
- Temperature range: 50°F to 86°F
- Region GB. Formulas can differ between countries; check your container.
- Ready for another coat: Normal conditions. Terracotta and diluted filler coats need 4 hours.
- Fully dry: Normal conditions.
- Curing period complete: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Farrow & Ball Exterior Masonry
- Variant
- Matt masonry paint (UK)
- Region
- GB
- Listed use
- rendered walls, brick, stucco
- Timed stages recorded
- recoat min, full dry, cure period
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Product data sheet
Condition attached to the stated time: Normal conditions. Terracotta and diluted filler coats need 4 hours.
About this product
A masonry paint with a 5 hour recoat, longer than the interior primer. The sheet asks for 10 to 30°C, 3°C above dew point and humidity under 80%.
Using this specific product
Farrow & Ball Exterior Masonry is listed here as the Matt masonry paint (UK) version for rendered walls, brick, and stucco. For cleaning or sealing masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Matt masonry paint (UK); related versions can use different timing.
- For rendered walls, brick, and stucco, pay particular attention to surface porosity, temperature, moisture in the substrate and rain forecast.
- Normal conditions. Terracotta and diluted filler coats need 4 hours. Normal conditions. The source gives no conditions for this time.
How to check readiness
Test a small area and watch for the stated rain-free and cure times. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. The sheet says dry in 2 hours. The sheet says darker colours can take up to 14 days to reach full hardness.
Avoid this mistake
A dry-looking surface can still be taking up a sealer or repellent.
Compare with similar products
- Compare with Sandtex Trade Fine Textured MattRecoat: 4 h there, 5 h here.
- Compare with Sandtex Trade High Cover SmoothRecoat: 3–5 h there, 5 h here.
Questions
How long before you can recoat this product?
Farrow & Ball states: The sheet says recoat after 5 hours. Conditions: Normal conditions. Terracotta and diluted filler coats need 4 hours.. The sheet says dry in 2 hours. Conditions: Normal conditions.. The sheet says darker colours can take up to 14 days to reach full hardness. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long between coats of Exterior Masonry?
The sheet gives 5 hours in normal conditions.
How long until this product is fully dry?
Farrow & Ball states: The sheet says dry in 2 hours. Conditions: Normal conditions.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.
Similar products
- Sandtex 365 All Weather Smooth MasonryExterior masonry paint (UK) · Masonry cleaners, sealers and water repellents · GBRecoat 16 hours
- Sandtex Trade High Cover SmoothSmooth masonry paint (UK) · Masonry cleaners, sealers and water repellents · GBRecoat 3–5 hours
- Sandtex Trade Fine Textured MattTextured masonry paint (UK) · Masonry cleaners, sealers and water repellents · GBRecoat 4 hours