Drive-Maxx 1000 Premium Filler & Sealer
Canadian data sheet (6455) · CA · manufacturer-sourced
How long before you can recoat Black Jack (Gardner-Gibson) Drive-Maxx 1000 Premium Filler & Sealer?
Short answer
Paver-joint plan
Brush in, wet down, then wait before traffic
- Sweep the Canadian data sheet (6455) into dry joints
- Activate as the label directs
- Keep traffic off until the stated time
This product’s stated stages
- Light foot traffic1 hour
- Ready for another coat3–6 hours
- Heavy traffic1–2 days
Worth noticing: Light foot traffic at 1 hour; heavy traffic at 1–2 days.
Common mistake: Letting rain or sprinklers hit joints that have not hardened.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time the paver cure
Your countdown
Stated times
- Ready for another coat3–6 hours
- Light foot traffic1 hour
- Heavy traffic1–2 days
From Black Jack (Gardner-Gibson) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: gardner-gibson.com
Conditions & fine print
- Stated conditions: Not stated in the data sheet
- Times depend on temperature, humidity, film thickness and sunshine. Follow the current label for your surface and weather. The label allows application from 7 to 37°C and says not to apply if temperatures below 7°C are expected overnight within 36 hours. Retailer-hosted Canadian copy.
- Temperature range: 45°F to 99°F
- Region CA. Formulas can differ between countries; check your container.
- Ready for another coat: The source gives no conditions for this time.
- Light foot traffic: Above 23°C, clear sunny skies, humidity below 35%.
- Heavy traffic: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Black Jack (Gardner-Gibson) Drive-Maxx 1000 Premium Filler & Sealer
- Variant
- Canadian data sheet (6455)
- Region
- CA
- Listed use
- driveway sealer, asphalt, blacktop
- Timed stages recorded
- recoat min, light foot, heavy traffic
- Source checked
- 2026-10-25
Documentation: Technical data sheet copy · Data sheet; no revision date
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A water-based rubberized driveway sealer, shown here from its Canadian data sheet. It has the shortest foot-traffic time of the Black Jack sealers on this site: 1 hour, but only under sunny, dry conditions.
Using this specific product
Black Jack (Gardner-Gibson) Drive-Maxx 1000 Premium Filler & Sealer is listed here as the Canadian data sheet (6455) version for driveway sealer, asphalt, and blacktop. For using this product, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Canadian data sheet (6455); related versions can use different timing.
- For driveway sealer, asphalt, and blacktop, pay particular attention to the exact variant, preparation and environmental conditions.
- The source gives no conditions for this time. Above 23°C, clear sunny skies, humidity below 35%.
How to check readiness
Check the real material or treated area at the slowest location before the next step. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Try a protected edge first and avoid turning, dragging or concentrated loads. Open the area gradually and keep heavy or hot tires off until the full stated milestone.
Avoid this mistake
The first visible change is not always the manufacturer’s final-use milestone.
Compare with similar products
- Compare with Seal-Krete Multi-Surface All-Purpose Water RepellentRecoat: 2 h there, 3–6 h here.
Questions
How long before you can recoat this product?
Black Jack (Gardner-Gibson) states: The label gives about 3 to 6 hours for the first coat to cure before the second coat. Conditions: The source gives no conditions for this time.. The label allows foot traffic in just 1 hour under normal drying conditions. Conditions: Above 23°C, clear sunny skies, humidity below 35%.. The label says to allow 24 hours to cure completely, and a separate section gives 24 to 48 hours for vehicle traffic. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
Does the one hour foot-traffic time apply on a cloudy day?
Not safely. The label ties 1 hour to normal drying conditions of above 23°C, clear sunny skies and humidity below 35%, and says humid or cloudy conditions may lengthen curing.
How long before I can walk on tile set with this product?
Black Jack (Gardner-Gibson) states: The label allows foot traffic in just 1 hour under normal drying conditions. Conditions: Above 23°C, clear sunny skies, humidity below 35%.. These are the manufacturer’s stated times, not a guarantee.
How long before heavy traffic is safe on this product?
Black Jack (Gardner-Gibson) states: The label says to allow 24 hours to cure completely, and a separate section gives 24 to 48 hours for vehicle traffic. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Times depend on temperature, humidity, film thickness and sunshine. Follow the current label for your surface and weather. The label allows application from 7 to 37°C and says not to apply if temperatures below 7°C are expected overnight within 36 hours. Retailer-hosted Canadian copy. Follow the product label for your conditions.