Black Jack (Gardner-Gibson)

Drive-Kote 500 Filler and Sealer

Driveway filler and sealer · US · manufacturer-sourced

Check your container: This countdown is for the Driveway filler and sealer variant. Similar-looking versions may have different times.

How long before you can recoat Black Jack (Gardner-Gibson) Drive-Kote 500 Filler and Sealer?

Short answer

Ready for another coat: 3–6 hours after application.
Light foot traffic: 2–4 hours after application.
Asphalt repair and sealers

Pavement reopening plan

Walking, driving and sealing happen on different days

  1. Clean and dry the pavement before the Driveway filler and sealer
  2. Keep rain and traffic off for the stated time
  3. Open to vehicles only at the stated time

This product’s stated stages Quoted at 70°F and 50% humidity

  • Light foot traffic2–4 hours
  • Ready for another coat3–6 hours
  • Heavy traffic1–2 days
  • Full cure1–2 days
  • Rain-ready36 hours

Worth noticing: You can recoat at 3–6 hours, but the film is not fully cured until 1–2 days.

Common mistake: Driving on a sealer that is dry on top but soft underneath; tire marks follow.

Asphalt repair and sealers

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Driveway filler and sealer directions and prepare for driveways and asphalt sealing.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Time reopening the pavement

When did you apply it to the pavement?
Conditions that affect drying
Where?
Thickness

Stated times

  • Ready for another coat3–6 hours
  • Light foot traffic2–4 hours
  • Heavy traffic1–2 days
  • Rain-safe36 hours
  • Full cure1–2 days

From Black Jack (Gardner-Gibson) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: gardner-gibson.com

Conditions & fine print
  • Stated conditions: 70°F (21°C) and 50% relative humidity
  • Asphalt products need dry pavement and a rain-free window. Cool, humid or cloudy weather slows them. Follow the current data sheet and label.
  • Temperature range: 65°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Ready for another coat: At 70°F (21°C) and 50% relative humidity.
  • Light foot traffic: At 70°F (21°C) and 50% relative humidity.
  • Heavy traffic: At 70°F (21°C) and 50% relative humidity.
  • Rain-safe: The source gives no conditions for this time.
  • Full cure: At 70°F (21°C) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Black Jack (Gardner-Gibson) Drive-Kote 500 Filler and Sealer
Variant
Driveway filler and sealer
Region
US
Listed use
driveways, asphalt sealing
Timed stages recorded
recoat min, light foot, heavy traffic, rain ready, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Data sheet 6452, copyright 2006, code D-06

Condition attached to the stated time: At 70°F (21°C) and 50% relative humidity.

About this product

A 2006 data sheet for a filler-sealer. The foot-traffic wait is short at 2 to 4 hours, the second coat goes on at 3 to 6 hours, and vehicles wait 24 to 48 hours. The sheet's own application range conflicts, 65 to 100°F in the table and below 90°F in the directions.

Using this specific product

Black Jack (Gardner-Gibson) Drive-Kote 500 Filler and Sealer is listed here as the Driveway filler and sealer version for driveways and asphalt sealing. For filling or sealing asphalt, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Driveway filler and sealer; related versions can use different timing.
  • For driveways and asphalt sealing, pay particular attention to pavement temperature, sun, humidity, depth of fill and rain in the forecast.
  • At 70°F (21°C) and 50% relative humidity. The source gives no conditions for this time.

How to check readiness

Check that the surface is firm, then keep traffic off for the stated time. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Try a protected edge first and avoid turning, dragging or concentrated loads. Open the area gradually and keep heavy or hot tires off until the full stated milestone.

Avoid this mistake

Sealer feels dry long before it will take a turning tire; wheels need the longer time.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Black Jack (Gardner-Gibson) states: The sheet says to apply the second coat after the first has cured, about 3 to 6 hours. Conditions: At 70°F (21°C) and 50% relative humidity.. The sheet says the driveway must cure about 2 to 4 hours for foot traffic. Conditions: At 70°F (21°C) and 50% relative humidity.. The sheet says the driveway must cure about 24 to 48 hours for vehicle traffic. Conditions: At 70°F (21°C) and 50% relative humidity.. The sheet says not to apply if rain or cold temperatures are expected within 36 hours. Conditions: The source gives no conditions for this time.. The sheet lists a full cure of 24 to 48 hours. Conditions: At 70°F (21°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

Does the Drive-Kote 500 sheet agree on application temperature?

Not fully. The directions say temperatures must be at least 65°F and rising but below 90°F, while the data table lists 65 to 100°F.

How long does this product take to fully cure?

Black Jack (Gardner-Gibson) states: The sheet lists a full cure of 24 to 48 hours. Conditions: At 70°F (21°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long before I can walk on tile set with this product?

Black Jack (Gardner-Gibson) states: The sheet says the driveway must cure about 2 to 4 hours for foot traffic. Conditions: At 70°F (21°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long before heavy traffic is safe on this product?

Black Jack (Gardner-Gibson) states: The sheet says the driveway must cure about 24 to 48 hours for vehicle traffic. Conditions: At 70°F (21°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Asphalt products need dry pavement and a rain-free window. Cool, humid or cloudy weather slows them. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All asphalt repair and sealers